koorio.com
海量文库 文档专家
当前位置:首页 >> >>

德国纤维标准


编号 DIN 15551-3-1985

中文名称 辐射敏感胶卷.硝酸纤维胶卷.术语、 特性、用途、贮存

DIN 16734-1986

与沥青不相容的人造纤维增强的增 塑聚氯乙烯(PVC-P)屋面毡.要求

DIN 16737-1986

聚氯乙烯(PE-C)制的屋面毡和带编 织纤维内衬层的防水薄板材.要求

DIN 16740-1976

玻璃纤维织物.电气用玻璃纤维织物. 交货技术条件

DIN 16741-1976

玻璃纤维织物.电气用带边的玻璃纤 维织物带.交货技术条件

DIN 16867-1982

化工管路用玻璃纤维增强式聚酯树 脂管道、配件和接头.交货技术条件 玻璃纤维增强式不饱和聚酯树脂 (UP-GF)管材.第1部分:缠绕式和填充 式.尺寸 玻璃纤维增强式不饱和聚酯树脂 (UP-GF)管材.第2部分:缠绕式和填充 式.一般质量要求、检验 离心浇注玻璃纤维增强聚脂树脂管 (VP-GF).第1部分:尺寸 离心浇注玻璃纤维增强聚脂树脂管 (VP-GF).第2部分:一般质量要求、检 验 纺织玻璃纤维增强环氧树脂管.尺寸 离心铸塑玻璃纤维增强环氧树脂管. 尺寸 热塑性塑料管道用管接头组件.玻璃 纤维增强的聚酯树脂(UP-GE)法兰.

DIN 16868-1-1994

DIN 16868-2-1994

DIN 16869-1-1995

DIN 16869-2-1995 DIN 16870-1-1987 DIN 16871-1982 DIN 16872-1993

英文名称 Radiation sensitive films; cellulose nitrate film; terminology, properties, utilization, storage Man-made fibre reinforced plasticized polyvinyl chloride (PVC-P) roofing felt incompatible with bitumen; requirements Chlorinated polyethylene (PE-C) roofing felt and waterproofing sheet with woven fabric inner layer; requirements Textile glass; textile glass fabrics for electrical purposes, technical delivery specifications Textile glass; tapes with edges consisting of textile glass fabrics for electrical purposes, technical delivery specifications Glass fibre reinforced polyester resin (UP-GF) pipes, fittings and joints for use in chemical pipelines; Technical delivery conditions Glass fibre reinforced unsaturated polyester resin (UP-GF) pipes - Part 1: Wound, filled; dimensions Glass fibre reinforced unsaturated polyester resin (UP-GF) pipes - Part 2: Wound, filled; General quality requirements, testing Centrifugally cast filled glass fibre reinforced unsaturated polyester resin (UP-GF) pipes - Part 1: Dimensions Centrifugally cast filled glass fibre reinforced unsaturated polyester resin (UP-GF) pipes - Part 2: General quality requirements, testing Wound glass fibre reinforced epoxy resin pipes; dimensions Centrifugally cast glass fibre reinforced epoxy resin (EP-GF) pipes; Dimensions Pipe joints assemblies for pipelines of thermoplastics; glass fibre reinforced

尺寸 DIN 16944-1988 DIN 16964-1988 DIN 16965-1-1982 DIN 16965-2-1982 DIN 16965-4-1982 DIN 16965-5-1982 玻璃纤维增强的反应型树脂模塑材 料.试验方法 绕制玻璃纤维增强聚酯树脂管.一般 质量要求和试验 绕制玻璃纤维增强聚酯树脂管 (UP-GF).A 型管.尺寸 绕制玻璃纤维增强聚脂树酯管.B 型 管.尺寸 纺织玻璃纤维增强聚脂树酯管.管、D 管型.尺寸 纺织玻璃纤维增强聚脂树酯管.管、E 管型.尺寸 玻璃纤维增强聚酯树脂(UP-GF)异型 件和连接件.第1部分:一般质量要求 和检验 玻璃纤维增强式聚酯树脂管道配件 和接头.弯管.尺寸 玻璃纤维增强聚酯树脂管(UP-GF)管 件和接头.三通喷管嘴尺寸 玻璃纤维增强聚酯树脂管(UP-GF)管 件和接头.缩径管.尺寸 玻璃纤维增强聚酯树管(UP-GF)管件 和接头组件.卡圈、法兰、密封圈、尺 寸 玻璃纤维增强聚酯树脂管道连接件 及其组件.第7部分:套筒、法兰、法兰 连接和对接件.一般质量要求和试验 方法 玻璃纤维增强聚酯管(UP-GF)管件和 接头.层压塑料接头.尺寸

DIN 16966-1-1988

DIN 16966-2-1982 DIN 16966-4-1982 DIN 16966-5-1982

DIN 16966-6-1982

DIN 16966-7-1995

DIN 16966-8-1982

polyester resin (UP-GF) flanges; dimensions Glass fibre reinforced reaction resin moulding materials; test methods Wound glass fibre reinforced polyester resins (UP-GF) pipes; general quality requirements and testing Wound glass fibre reinforced polyester resin (UP-GF); pipes, Type A pipes, dimensions Wound glass fibre reinforced polyester resin (UP-GF); pipes, Type B pipes, dimensions Wound glass fibre reinforced polyester resin (UP-GF); pipes, Type D pipes, dimensions Wound glass fibre reinforced polyester resin (UP-GF); pipes, Type E pipes, dimensions Glass fibre reinforced polyester resin (UP-GF) pipe fittings and joint assemblies; fittings; general quality requirements and testing Glass fibre reinforced polyester resin (UP-GF) pipe fittings and joints; Elbows, Dimensions Glass fibre reinforced polyester resin (UP-GF) pipe fittings an joints; Tees, Nozzles, Dimensions Glass fibre reinforced polyester resin (UP-GF) pipe fittings and joints; Reducers, Dimensions Glass fibre reinforced polyester resin (UP-GF) pipe fittings and joint assemblies; collars, flanges, joint rings, dimensions Pipe joints and their elements of glass fibre reinforced polyester resins - Part 7: Bushings, flanges, flanged and butt joints; general quality requirements and test methods Glass fibre reinforced polyester resin (UP-GF) pipe fittings and joints; Laminated joints; Dimensions

DIN 16967-2-1982 DIN 18089-1-1984 DIN 18191-1980 DIN 18192-1985

DIN 18204-1-2007

DIN 18820-1-1991

DIN 18820-2-1991

DIN 18820-3-1991

DIN 18820-4-1991

DIN 19850-1-1996 DIN 19850-2-1996 DIN 2103-1993

Glass fibre reinforced epoxy resin (EP-GF) pipe fittings and joints; Elbows, Tees, Dimensions Fire barriers; fillers for fire-doors; 防火隔板.防火门填料.矿物纤维板 mineral fibre boards (felts); definition, (毡).定义、名称、要求、检验 designation, requirements, tests Woven glass fabric as inlay bituminous 作沥青路衬底的机织玻璃纤维织物 sheeting Bonded polyester fleece used as an 作沥青和聚合物沥青薄板镶嵌物的 inlay for bitumen and polymer bitumen 粘合聚酯纤维毡.概念、 标志、 要求和 sheeting; concept, designation, 试验 requirements, testing Components for enclosures made of 用纺织物和塑料薄膜(篷帐布)制造的 textile fabrics and plastic films 建筑物和帐篷罩部件.第1部分:涂聚 (awnings) for structures and tents Part 1: PVC coated polyester base 氯乙烯(PVC)的聚酯基底纤维 fabric Laminates of textile glass-reinforced 承载构件用玻璃纤维增强非饱和聚 unsaturated polyester and phenacrylic 酯树脂和苯甲酰甲基树脂制层压塑 resins for load-bearing structural 料(GF-UP、GF-PHA).第1部分:结构、 members (GF-UP, GF-PHA); structure, 制造和特 manufacture and characteristics Laminates of textile glass-reinforced 承载构件用玻璃纤维增强式非饱和 unsaturared polyester and phenolic 聚酯和苯酚树脂制层压塑料 resins for load-bearing structural (GF-UP.GF-PHA).第2部分:标准层压 members (GF-UP, GF-PHA); physical 塑料的物理参数 parameters for standard laminates Laminates of textile glass-reinforced 承载构件用玻璃纤维增强非饱和聚 unsaturated polyester and phenacrylic 酯树脂和苯甲酰甲基树脂制层压塑 resins for load-bearing structural (GF-UP, GF-PHA); 料(GF-UP、 GF-PHA).第3部分:承载层 members protective measures for load-bearing 压塑料的 laminates Laminates of textile glass-reinforced 承载构件用玻璃纤维增强非饱和聚 unsaturated polyester and phenacrylic 脂树酯和苯甲酰甲基树脂制层压塑 resins for load-bearing structural 料(GF-UP、 GF-PHA).第4部分:试验和 members (GF-UP, GF-PHA); tests and 质量控制 quality control Fibre cement pipes and fittings for 污水管道用纤维水泥管和配件件.第1 sewers - Part 1: Dimensions of pipes, 部分:管,支管和弯头尺寸 branches and bends 纤维水泥污水管和接头.第2部分:接 Fibre cement pipes and fittings for sewers - Part 2: Dimensions of joints 头尺寸 办公室机器.油墨带.纺织纤维油墨带 Office machines; inked ribbons; woven 玻璃纤维增强环氧树脂(EP-GF)管件 和接头.弯管、三通管、尺寸

DIN 28018-2006 DIN 28019-2006

玻璃纤维衬钢的压力容器.设备用 0.063-10立方米的生产设备用容器 玻璃纤维衬钢的压力容器.12.5-125 立方米的储存用容器

DIN 28091-2-1995

密封板的交货技术条件.第2部分:纤 维基密封材料.要求和试验

DIN 28136-11-1989

搅拌器.第11部分:玻璃纤维衬里的 CE 型公称容量为 4000 升更换用刚 制搅拌器顶盖喷嘴的位置和尺寸 玻璃纤维衬里搅拌容器用焊接件.第6 部分:支架 航空航天.纤维增强的塑料构件.图纸 和零件清单的说明 航空航天.碳纤维.碳纤维素长丝纱.技 术规范 航空航天.不定向碳纤维环氧树脂薄 板和预浸渍带.技术规范 钢丝绳.6× 24标准加7纤维芯的圆形 绞股钢丝绳 煤气供气密封件:煤气管件和煤气设 备用橡胶、 软木和合成纤维制密封材 料.安全性试验要求

DIN 28145-6-1979 DIN 29505-1987 DIN 29965-1992 DIN 29971-1991 DIN 3068-1972

DIN 3535-5-1993

DIN 3535-6-1999

供气用密封垫.第6部分:气阀、 煤气设 备和煤气主管道用基于合成纤维、 石 墨或聚四氟乙烯的密封垫材料 硬化纤维.第1部分:板材、薄板材、条 材、带材 硬化纤维.第1部分:管材和棒材 镍镉蓄电池.带纤维结构板的电池.塑 料容器电池.标称容量、主要尺寸

DIN 40604-1-1965 DIN 40604-2-1967 DIN 40763-1-1988

fabric ribbons Pressure vessels, glass lined steel Vessels for production plants 0,063 m<(hoch)3> up to 10 m<(hoch)3> Pressure vessels, glass lined steel Vessels for storage 12,5 m<(hoch)3> up to 125 m<(hoch)3> Technical delivery conditions for gasket sheets - Part 2: Fibre-based gasket materials (FA); requirements and testing Agitator vessels; position and sizes of cover nozzles for glass lined steel agitator vessels, type CE, with a nominal volume of 4000 litres for replacement purposes Parts welded to glass lined agitator vessels; bracket Aerospace; components of fibre reinforced plastics; indications in drawings and parts lists Aerospace; carbon fibres; carbon fibre filament yarns; technical specification Aerospace; unidirectional carbon fibre-epoxy sheet and tape prepreg; technical specification Steel wire ropes; round strand rope 6 × 24 Standard + 7 fibre cores Sealants for gas supply; sealing materials of rubber, cork and synthetic fibres for gas armatures and gas appliances; safety requirements, tests Gaskets for gas supply - Part 6: Gasket materials based on synthetic fibres, graphite or polytetrafluoroethylen (PTFE) for gas valves, gas appliances and gas mains Vulcanized Fibre; Panels (Sheets), Sheeting, Strips, Tapes Vulcanized fibre; tubes and rods Nickel-cadmium-batteries; cells with fibre structured plates; cells in plastic containers; nominal capacities, main

DIN 40763-2-1990

镍镉蓄电池.带纤维结构板的电池.塑 料容器电池.放电电流、最终放电电 压、放电时间

DIN 4102-17-1990

建筑材料和构件的防火性能.第17部 分:矿物纤维绝缘材料熔点的测定.概 念、要求和检验

DIN 4195-1976

筛底.丝或化学纤维纺织布.尺寸

DIN 52141-1980 DIN 52142-1978 DIN 52187-1979 DIN 52271-1981

用做屋顶和防水板防护层的玻璃纤 维毛状衬料.定义、名称、要求 卷铺屋面料和防水屋面料的载体材 料玻璃纤维网.试验程序 木材的检验.顺纤维方向的极限剪切 强度的测定

矿物纤维绝缘材料的检验.高温性能

DIN 52274-1986

矿物纤维绝缘材料检验.断裂强度.垂 直于绝缘层面的层间抗拉强度测定

DIN 52275-2-1978 DIN 52316-1970 DIN 53133-2006 DIN 53178-1969 DIN 53390-1988

矿物纤维绝缘材料的检验.测定直线 尺寸和体密度.管壳 玻璃的检验.连续玻璃纤维长丝粗纱 的刚性测定 纸板的试验.测定胶粘合波纹纤维板 的耐水性 色漆、 清漆和类似涂料的检验.喷漆中 硝化纤维含量的测定 玻璃纤维增强塑料的检验.单向玻璃 纤维增强层压塑料圆棒的弯曲试验

dimensions Nickel-cadmium batteries; cells with fibre structured plates; cells in plastic containers; discharge current, final discharge voltages, discharge time Fire behaviour of building materials and elements; determination of melting point of mineral fibre insulating materials; concepts, requirements and testing Screening surfaces; woven filament cloth of silk or man-made fibers, dimensions Glass fibre fleece as layer for roof and water-proof sheeting; definition, designation, requirements Glass fibre mat as carrier material for roll roofing and waterproofing; test procedures Testing of wood; determination of ultimate shearing stress parallel to grain Testing of mineral fibre insulating materials; Behaviour at elevated temperatures Testing of mineral fibre insulating materials; determination of interlaminar tensile strength perpendicular to plane of insulating layer Testing of mineral fibrous insulating materials; determination of linear dimensions and bulk density, casings Testing of glass; determination of stiffness of continuous filament glass fibre rovings Testing of board - Determination of water resistance of glue bond of corrugated fibreboard Testing of paints, varnishes and similar products; determination of nitro cellulose content of lacquers Testing of glass fibre reinforced plastics; bending test on unidirectional

DIN 53393-1976 DIN 53766-1-1991

玻璃纤维增强塑料的检验.受化学制 品作用的性能 玻璃纤维增强塑料器具和容器的检 验.粘合强度的测定 玻璃纤维增强塑料管道检验.第1部 分:B 型管道配件纵向剪切强度的测 定 玻璃纤维增加塑料管道检验.长期静 液压试验 玻璃纤维增强塑料管试验.管子短时 间和长时间最大压力试验

DIN 53769-1-1988

DIN 53769-2-1986 DIN 53769-3-1988

DIN 53769-6-1989

玻璃纤维增强塑料管道检验.第6部 分:受内压脉动作用的管道和配件

DIN 53805-1980 DIN 53806-1970 DIN 53808-1-2003 DIN 53811-1970 DIN 53814-1974

纺织品的试验.短纤维长度的测定.术 语和一般原则 纺织品的试验.根据精梳纤维长度测 量方法测定棉纤维长度 纺织品的检验.用单纤维测量法测定 纤维长度 纺织品的试验.从显微投影的纵视图 中测定纤维的直径 纺织品的检验.纤维和纱段吸湿能力 的测定 纺织品的检验 .单根纱线和合股线的 线密度的测定.弹性纱线.包括由弹性 纤维纺成的包芯纱线.用分段法 纺织品的检验.第2部分:纺织纤维的 环状拉力试验 纺织品试验.纤维转移倾向的测定.转

DIN 53830-4-1981 DIN 53843-2-1988 DIN

glass fibre reinforced laminated plastics in the form of round bars Testing of Textile Glass-reinforced Plastics; Behaviour to the Effect of Chemicals Testing of glass fibre reinforced plastics apparatus and containers; determination of adhesive strength Testing of glass fibre reinforced plastics pipes; determination of the longitudinal shear strength of type B pipe fittings Testing of glass fibre reinforced plastics pipes; long-term hydrostatic pressure test Testing of glass fibre reinforced plastics pipes; determination of initial and long-term ring stiffness Testing of glass fibre reinforced plastics pipes; Testing of pipes and fittings under pulsating internal pressure Testing of textiles; determination of the length of staple fibres; terminology and general principles Testing of textiles; determination of fibre length of cotton according to the comb staple method Testing of textiles - Determination of length of fibres by measuring of individual fibres Testing of textiles; determination of the diameter of fibres from longitudinal view by microscope projection Testing of textiles; determination of water retention power of fibres and yarn cuttings Testing of textiles; determination of linear density of single and plied yarns; elasto-yarns including core spun yarns from elastofibres; short length method Testing of textiles; loop tensile test for staple fibres Testing of textiles - Determination of

53865-1998 DIN 53941-1983 DIN 53943-1-1986 DIN 53943-2-1978

筒缩绒法 纺织品的检验.棉纤维马克隆尼值 (Micronaire-Wert)的测定 纺织品检验.棉纤维的成熟期.第1部 分:概念 纺织品的检验.第2部分:通过苛性钠 溶液的膨胀处理并采用显观法对棉 纤维的成熟度的测定 纺织品的试验.棉纤维的成熟情况.百 分比成熟度的测定.用偏光显微镜的 显微镜检验法 纺织品的试验.棉纤维计量长度和均 匀度的测定 纺织品的检验.用溶解法测定纤维混 纺成分的定量测定.原理及应用范围

DIN 53943-3-1983 DIN 53944-1993 DIN 54200-1974

DIN 54201-1975

纺织品的检验.纤维混纺织物的定量 分析,一般操作方法 纺织品的检验.羊毛和其它纤维二元 混合织物的定量分析.氢氧化钾溶液 法 纺织品试验.二元混合物成份的定量 分析.天然或再生纤维素纤维与聚酯 纤维.硫酸法 纺织品试验.二元混合物成份的定量 分析.蛋白质纤维与其它纤维.次氯酸 盐法

DIN 54204-1975

DIN 54205-1975

DIN 54206-1975

DIN 54208-2001

纺织品的试验.二元混合物的定量分 析.含有其它纤维特别是棉花的再生 纤维素纤维.甲酸/氯化锌法

DIN 54210-1975 DIN

纺织品的检验..醋酯纤维素纤维与其 它纤维二元混合织物的定量分析.丙 酮法 纺织品的检验.三醋酸短纤维与其它

fibre migration tendency Tumble-method Testing of textiles; determination of micronaire value of cotton fibres Testing of textiles; cotton fibre maturity; concepts Testing of textiles; state of maturity of cotton fibres, microscopic method, swelling in caustic soda solution Testing of textiles; cotton fibre maturity; determination of the percent maturity; microscopic method using a polarisation microscope Testing of textiles; determination of gauge length and eveness of cotton Testing of textiles; quantitative analysis of fibre mixtures by means of solvent method, basis and field of application Testing of textiles; quantitative analysis of fibre mixtures, directions for the work Testing of textiles; quantitative analysis of binary mixtures, wool with other fibres, potassium hydroxide solution method Testing of textiles; quantitative analysis of binary mixtures, natural or regenerated cellulose fibres with polyester fibres, sulphuric acid method Testing of textiles; quantitative analysis of binary mixtures, protein fibres with other fibres, hypochlorite method Testing of textiles - Quantitative analysis of binary mixtures Regenerated cellulose fibres with other fibres, especially cotton; Formic acid/zinc chloride method Testing of textiles; quantitative analysis of binary mixtures, acetate fibres with other fibres, acetone method Testing of textiles; quantitative

54211-1975

纤维二元混合织物的定量分析.二氯 甲烷法

DIN 54212-1975

纺织品的检验.酪蛋白纤维与其它纤 维二元混合织物进行定量分析.胰蛋 白酶法 纺织品的检验.聚丙烯纤维与其它纤 维二元混合物定量分析.混合二甲苯 法 纺织品的检验.聚氯乙烯纤维与其它 纤维二元混合织物的定量分析.二硫 化碳/丙酮法 纺织品的检验.丙烯酸纤维、 改良丙烯 酸纤维及某些聚氯乙烯纤维与其它 纤维二元混合织物的定量分析.二甲 基甲酰

DIN 54215-1977

DIN 54216-1975

DIN 54217-1975

DIN 54218-1975

纺织品的检验.醋酸纤维与聚氯乙烯 纤维二元混合物的定量分析.醋酸法

DIN 54220-1975

纺织品的检验.聚酰胺66纤维或聚酰 胺6纤维与其它纤维二元混合织物的 定量分析.甲酸法 纺织品的检验.聚酰胺66纤维或聚酰 胺6纤维与其它纤维二元混合织物的 定量分析.盐酸法 纺织品的检验.第1部分:纤维素极限 粘度测定原则 纺织品的检验.用氢氧化铜乙二氨溶 液法测定纤维素的极限粘度 纺织品的检验.第3部分:纤维素极限 粘 度 的 测 定 .EWNN<( 指 数)mod(NaCl)>程序 纺织品的检验.用硝酸盐法测定纤维 素的极限粘度

DIN 54221-1975 DIN 54270-1-1976 DIN 54270-2-1977

DIN 54270-3-1977

DIN 54270-4-1977

analysis of binary mixtures, triacetate fibres with other fibres, dichlormethane (methylene chloride) method Testing of textiles; quantitative analysis of binary mixtures, casein fibres with other fibres, trypsin method Testing of textiles; quantitative analysis of binary mixtures, polypropylene fibres with other fibres, xylol method Testing of textiles; quantitative analysis of binary mixtures, polyvinyl chloride fibres with other fibres, carbon disulphide/acetone method Testing of textiles; quantitative analysis of binary mixtures, acrylic, modacrylic and certain polyvinyl chloride fibres with other fibres, dimethyl formamide method Testing of textiles; quantitative analysis of binary mixtures, acetate fibres with polyvinyl chloride fibres, acetic acid method Testing of textiles; quantitative analysis of binary mixtures, polyamide 6 6 or polyamide 6 fibres with other fibres, formic acid method Testing of textiles; quantitative analysis of binary mixtures, polyamide 6 6 or polyamide 6 fibres with other fibres, hydrochloric acid method Testing of textiles; determination of the limit-viscosity of celluloses, principles Testing of textiles; determination of the limit-viscosity of celluloses, Cuen-procedure Testing of textiles; determination of the limit-viscosity of celluloses, EWNN<(Index)mod(NaCl)>-procedur e Testing of textiles; determination of the limit-viscosity of celluloses, nitrate procedure

DIN 54274-1983 DIN 54275-1977 DIN 54282-1971 DIN 54288-1977

DIN 54500-2004

DIN 54813-1994 DIN 55428-1-1998 DIN 55428-2-1998

DIN 55429-2-1987 DIN 55483-1-1984

DIN 55511-1-1984

DIN 55511-3-1984

DIN 55952-1981 DIN

Testing of textiles; quantitative analysis of amino end groups in polyamide fibres Testing of textiles; determination of the 纺织品的检验.用外推法测定纤维材 pH value of fibre materials, method of 料的 pH 值 extrapolation Testing of textiles; determination of 纺织品的检验.醋酸纤维或三醋酸纤 content of acetic acid of acetate or 维中醋酸含量的测定 triacetate fibres Testing of textiles; quantitative 纺织品试验.粘胶纤维中硫的定量测 determination of sulfur in viscose 定 fibres Testing of paper - Determination of the 纸的检验.与密度相关的纤维及纸的 density-related light-scattering and absorption coefficients of paper and 光散射和吸光系数的测定 fibre materials Testing of plastics; testing of joints of 塑料检验.纺织玻璃纤维增强的聚酯 textile glass reinforced polyester 树脂塑料的连接试验.用弯曲剪切试 resins; determination of the breaking 验测定断裂负荷 load by the bending shear test 包装材料.硬质纤维板.第1部分:要求 Packaging materials - Solid fibreboard - Part 1: Requirements, testing 和试验 Packaging materials - Solid fibreboard 包装材料.硬质纤维板.第2部分:湿强 - Part 2: Wet strength; requirements, 度.要求和试验 testing Packaging; boxes manufactured from 包装.纸板、硬纤维板或波纹板制箱 board, solid fibre-board or corrugated board; dimensions, limit deviations, 子.尺寸、极限偏差、尺寸检验 testing of dimensions 包装用橡胶纤维和/或动物纤维.第1 Rubberized fibre and/or hair for packaging; requirements, testing 部分:要求、检验 Means of packaging; boxes 包装方法.可调整到600mm× 400mm、 manufactured from solid fibre-board or 用硬纤维板和波纹板制成的包装箱. corrugated board, adjusted to 600 mm 400 mm (area module); folding boxes 带底和折板顶盖的可折叠箱 with bottom and top flaps Means of packaging; boxes 包装方法.可调整到600mm× 400mm、 manufactured from solid fibre-board or 用硬纤维板和波纹板制成的包装箱. corrugated board, adjusted to 600 mm 400 mm (area module); telescope 伸缩式包装箱 boxes Binders for paints and varnishes; 油漆和清漆的粘合剂.纤维素醚.试验 cellulose ethers; testing Binders for paints and varnishes; 油漆和清漆.有机酸纤维素酯.试验 纺织品试验.对聚酰胺纤维中氨端基 进行定量测

55953-1981

DIN 57441-2-1982

标称电压>1KV 系统用有机材料绝缘 子试验.带玻璃纤维芯子的户外链式 绝缘子的试验(VDE 规范)

cellulose esters of organic acids; testing Tests on insulators of organic material for systems with nominal voltages greater than 1 kV; tests on outdoor composite insulators with fibre glass core [VDE Guide] Fibre optics; terms and symbols Fibre optics; classification of fibre optic elements Testing of fibre optic elements; determination of diameters and thicknesses of optical fibres Testing of fibre optic elements; determination of the rate of broken fibres of light and image conductors Testing of fibre optic elements; determination of tensile load of fibre optic cables Testing of fibre optic elements - Part 9: Determination of deviation of the roundness and the concentricity of optical fibres Haemostaseology - Determination of fibrinogen concentration - Part 1: Reference measurement procedure for the determination of clottable fibrinogen as described by Clauss Textile fibres - Part 1: Natural fibres and letter codes Textile fibres; forms of fibres and manufacturing Textile slings - Safety - Disposable flat woven slings, made of man-made fibres flax fibre; processing phases Products of fibre preparing and preparatory spinning, terms and definitions Yarns produced on bast fibre spinning systems Hard fibre yarns

DIN 58140-1-1986 DIN 58140-2-1986 DIN 58141-4-1990 DIN 58141-5-1993 DIN 58141-7-1990

纤维光学.术语和符号 纤维光学.纤维光学元件的分类 光学纤维元件的检验.光导纤维的直 径和厚度的测定 光纤元件的检验.光导体和图象导体 纤维折断率的测定 光学纤维元件的检验.纤维光缆抗拉 载荷的测定

DIN 58141-9-1995

纤维光学元件的检验.第9部分:光学 纤维的圆度和同心度偏差的测定

DIN 58906-1-2000

止血学.纤维蛋白原浓度测定.第1部 分:按测定条款中规定的可凝固的纤 维蛋白原的参考测量方法 纺织纤维.第1部分:天然纤维和字母 代码 纺织纤维.第2部分:纤维形状和生产 方式 纺织吊索.安全.人造纤维一次性单层 机织吊索 亚麻纤维 .加工阶段 纤维初加工产品和前纺工程产品.术 语和定义 用韧皮纤维纺织法纺制的纱线 硬纤维纱线

DIN 60001-1-2001 DIN 60001-2-1990 DIN 60005-2006 DIN 60011-1958 DIN 60021-1975 DIN 60105-1983 DIN

60150-1984 DIN 60910-1985 DIN 6141-2000 DIN 61850-1976 DIN 61853-1-1987 DIN 61853-2-1987 纺织纤维和纱线的线性密度.得可萨 斯(Tex)体系的换算表 包装材料.纤维板带盖桶.钢制的底和 盖 纺织玻璃纤维产品和辅助产品.术语 和定义 纺织玻璃纤维.增强塑料用的玻璃纤 维毡片.交货技术条件 纺织玻璃纤维.增强塑料用的玻璃纤 维毡片.分类和用途 玻璃纤维织物.塑料增强用的纺织玻 璃纤维织物.纺织玻璃长丝织物和纺 织粗纱.交货技术条件 玻璃纤维织物.塑料增强用的纺织玻 璃纤维织物.纺织玻璃长丝织物和纺 织粗纱.类型 纺织纤维预梳用的粗梳机.术语、 定义 和结构原理 航空航天.玻璃纤维织物.增强塑料材 料用玻璃纤维丝粗纱.技术规范 航空航天.纤维增强树脂.技术规范 航空航天.纺织玻璃纤维.玻璃长丝纱 织物.技术规范 航空航天.具有纤维增强塑料覆盖层 (FK)的夹层结构.技术规范 Linear densities of textile fibres and yarns; conversion tables for the Tex system Packaging - Fibreboard drums Bottom and lid made of steel Textile glass products and auxiliary products; terms and definitions Textile glass; textile glass mats for plastics reinforcement; technical delivery conditions Textile glass; textile glass mats for plastics reinforcement; classification and application Textile glass; woven glass fabrics for plastics reinforcement; woven glass filament fabric and woven roving; technical delivery conditions Textile glass; woven glass fabrics for plastics reinforcement; woven glass filament fabric and woven roving; types Carding willow for fibre-preparing; terms and definitions, principles of construction Aerospace; textile glass; textile glass filament rovings for reinforcement of plastics; technical specification Aerospace; resins for fiber reinforced, technical specification Aerospace; textile glass; woven glass filament fabric; technical specification Aerospace; sandwich structures with top layers of fibre reinforced plastics, technical specification Aerospace; fibre reinforced moulding materials; preparation of test panels of unidirectional wound yarns and rovings Aerospace; fibre reinforced moulding materials; preparation of test panels of plain reinforcing fibre products Aerospace; fibre reinforced moulding materials; preparation of

DIN 61854-1-1987

DIN 61854-2-1987

DIN 64165-1977 DIN 65060-1991 DIN 65065-1979 DIN 65066-1991 DIN 65067-1-1980

DIN 65071-1-1992

航空和航天.纤维增强模塑材料.单向 缠绕的纱和粗纱试验板的制备

DIN 65071-2-1992 DIN 65071-3-1993

航空航天.纤维增强模塑材料.平面增 强织物试验板的制备 航空和航天.纤维增强模塑材料.蜂窝 状预浸渍夹层试验板的制备

DIN 65090-1979

航空航天.用 E 型玻璃制成的玻璃纤 维和预浸玻璃长丝织物(预浸渍体). 技术规范条件 航空和航天.硼纤维增强的模塑材料. 层压试件的制备 航空和航天.预浸渍单向硼纤维层 (BFK-浸渍体),尺寸、质量 航空航天.预浸渍的纤维薄板和纤维 带(预浸渍的).粘接强度的测定 航空航天.预浸渍的碳纤维长丝织物 和环氧树脂.技术规范 航空航天.碳素纤维.碳素纤维长丝织 物.尺寸、质量 航空航天.碳纤维.碳纤维长丝织物.技 术规范 航空航天.纤维增强塑料的试验.用拉 伸试验测定中层间的抗剪强度 航空航天.碳纤维.高性能碳纤维素长 丝纱.尺寸和质量 航空航天.纤维增强的塑料.单向层压 板的试验.与纤维方向垂直的压力试 验 航空航天.纤维增强的塑料.单向层压 板的检验.与纤维方向垂直的拉伸试 验 航空航天.塑料用加强纤维.浸渍纱线 试样的拉力试验 航空航天.结构用热固环氧树脂纺织 玻璃纤维长丝织物预浸渍品.技术规 范

DIN 65116-1980 DIN 65117-1980 DIN 65142-1989 DIN 65146-2-1991 DIN 65147-1-1987 DIN 65147-2-1987 DIN 65148-1986 DIN 65184-1993

DIN 65375-1989

DIN 65378-1989 DIN 65382-1988

DIN 65383-1997

honeycomb/prepreg sandwich test panels Aerospace; textile glass, preimpregnated filament glass cloth from E-glass (Prepreg), technical specifications Aerospace; boron fibre reinforced mouldings, preparation of test laminates Aerospace; preimpregnated unidirectional boron fibres (BFK-prepreg), dimensions, masses Aerospace; preimpregnated fibre sheet and tape (prepreg); determination of bond strength Aerospace; preimpregnated woven fabric of carbon filament yarn and epoxy resin; technical specification Aerospace; carbon fibres; fabric of carbon fibre filament yarn; dimensions, masses Aerospace; carbon fibres; fabric of carbon fibre filament yarn; technical specification Aerospace; testing of fibre-reinforced plastics; determination of interlaminar shear strength by tenside test Aerospace; carbon fibres; high performance carbon fibre filament yarns; dimensions, masses Aerospace; fiber reinforced plastics; testing of unidirectional laminates; compression test transverse to fiber direction Aerospace; fiber reinforced plastics; testing of unidirectional laminates; tensile test transverse to fiber direction Aerospace; reinforcement fibres for plastics; tensile test of impregnated yarn test specimens Aerospace - Thermosetting epoxy woven glass filament fabric preimpregnated for structural applications - Technical specification

DIN 65453-1993

航空航天.碳纤维和双马来酰亚胺树 脂或聚酰亚胺树脂制的预浸渍不定 向薄板材 航空航天.纤维增强塑料.单向层压制 品试验.拉伸剪切强度和剪切模数测 定 航空航天.纤维增强的塑料.单层扁平 拉伸样件的拉伸试验 航空航天.纤维增强的塑料.温度锋值 试验方法 航空航天.纤维增强的塑料.多向层压 板的试验.缺口孔抗拉强度的测定

DIN 65466-1996

DIN 65469-1992 DIN 65474-1992 DIN 65559-1991

DIN 65560-1991

航空航天.纤维增强的塑料.多向层压 板的试验.已填充孔抗压强度的测定

DIN 65561-1991

航空航天.纤维增强的塑料.多向层压 板的试验.冲击试验负荷后抗压强度 的测定 航空航天.纤维增强的塑料.多向层压 板的试验.支承强度的测定

DIN 65562-1991

DIN 65564-1992

航空航天.增强纤维.用 HPLC 法对碳 素长丝纱、 织物和短切原丝的浆成份 进行定性测定

DIN 65565-1992

航空航天.增强纤维.用红外分光法对 碳素长丝纱、 织物和短切原丝的浆类 型进行定性试验

DIN 65566-1992 DIN 65567-1992

航空航天.增强纤维.碳素长丝纱、织 物和短切原丝的浆含量的测定 航空航天.增强纤维.芳族聚酰胺长丝 纱,织物和短切原丝的整理剂含量的

Aerospace; preimpregnated unidirectional sheet of carbon fibres and bismaleinimide- or polyimide resin; technical specification Aerospace - Fibre reinforced plastics Testing of unidirectional laminates; Determination of shear strength and shear modulus in tension Aerospace; fibre-reinforced plastics; tensile test of monolayer flat tension specimens Aerospace; fibre reinforced plastics; thermal-spike test method Aerospace; fibre reinforced plastics; testing of multidirectional laminates; determination of open-hole tensile strength Aerospace; fibre reinforced plastics; testing of multidirectional laminates; determination of filled-hole compressive strength Aerospace; fibre reinforced plastics; testing of multidirectional laminates; determination of compressive strength after impact test Aerospace; fibre reinforced plastics; testing of multidirectional laminates; determination of bearing strength Aerospace; reinforcement fibres; qualitative determination of size constituents of carbon filament yarns, woven fabrics and chopped strands by HPLC Aerospace; reinforcement fibres; qualitative testing of size type of carbon filament yarns, woven fabrics and chopped strands by infrared spectroscopy Aerospace; reinforcement fibres; determination of size content of carbon filament yarns, woven fabrics and chopped strands Aerospace; reinforcement fibres; determination of finish content of

测定

DIN 65568-1992

航空航天.增强纤维.碳素长丝纱、织 物和短切原丝的耐热氧化性能的测 定 航空航天.增强纤维.复丝纱密度的测 定.悬浮法 航空航天.增强纤维.复丝纱密度的测 定.流体比重秤量法

DIN 65569-1-1992 DIN 65569-2-1992

DIN 65571-1-1992

航空航天.增强纤维.复丝纱横截面面 积和复丝纱直径的测定.计算方法

DIN 65571-2-1992

航空和航天.增强纤维.复丝纱直径的 测定.纵向投影法

DIN 65571-3-1992

航空航天.增强纤维.长丝纱的长丝直 径、 长丝横截面形状和横截面面积的 测定.横磨测量

DIN 65571-4-1992

航空航天.增强纤维.复丝纱的长丝直 径的测定.激光干涉测量法 航空航天.碳纤维和无活性热塑塑料 制单向片材和带材的预浸料.技术规 范 航空航天.纤维增强塑料.动态负荷下 纤维复合材料的玻璃化转变的测定 航空航天.纤维增强塑料.放热反应时 温差的测定 航空航天.纤维增强塑料.层压制品裂 纹频度的测定 航空航天.碳纤维和非活性热塑塑料 制预浸渍纤维薄板材和带材. 技术规 范

DIN 65572-1992

DIN 65583-1999 DIN 65597-1993 DIN 65598-1993 DIN 65629-1993

aramid filament yarns, woven fabrics and chopped strands Aerospace; reinforcement fibres; determination of thermal oxidative resistance of carbon filament yarns, woven fabrics and short cuts Aerospace; reinforcement fibres; determination of density of filament yarns; sink-float method Aerospace; reinforcement fibres; determination of density of filament yarns; hydrostatic weighing method Aerospace; reinforcement fibres; determination of filament diameter and cross-sectional area of filament yarns; calculation method Aerospace; reinforcement fibres; determination of filament diameter of filament yarns; longitudinal projection method Aerospace; reinforcement fibres; determination of filament diameter, cross-sectional shape and area of filament yarns; measurement of transverse micro-section Aerospace; reinforcement fibres; determination of filament diameter of filament yarns; laser interferometry Aerospace; unidirectional sheet and tape prepreg from carbon fibres and non-reactive thermoplastics; technical specification Aerospace - Fibre reinforced materials - Determination of glass transition of fibre composites under dynamic load Aerospace; fibre reinforced plastics; determination of temperature difference on exothermic reaction Aerospace; fibre reinforced plastics; determination of cracking frequency on laminates Aerospace; fabric sheet and tape prepreg from carbon fibres and non-reactive thermoplastics; technical

DIN 65673-1999

航空航天.纤维增强塑料.纱疵,织疵和 预浸渍体疵点的定义

DIN 68100 Bb.4-1978

木材处理和加工的线性测量和角度 量纲的公差.受湿度影响刨花板、 胶合 板和纤维板在厚度、 长度和宽度方向 的尺

DIN 6899-1988 DIN 7737-1959 DIN 7738-1959

纤维绳索的钢套环 层压制品.硬化纤维.型号 层压材料制品.硬化纤维板.验收.检验 方法 塑 料 模 塑 材 料 . 纤 维 素 聚 酯 类 (CA, CP, CAB)热塑性模塑材料.分类和名 称 纤维素酯(CA.CPCAB)模塑材料.第2 部分:模塑材料试样的制备和性能测 定 纤维绳的加强线夹 船舶和海上技术.圆形或螺旋形编织 的化学纤维绳索 纤维绳索.捻接绳.定义、安全性要求. 试验方法 造船和海上技术.按韧皮纤维纺纱加 工系统生产的纱线制的聚丙烯纤维 绳索 船舶和海上技术.高拉伸强度多丝制 聚丙烯纤维绳索

DIN 7742-1-1988

DIN 7742-2-1990 DIN 81921-1982 DIN 83307-1999 DIN 83319-1999 DIN 83329-1998

specification Aerospace - Fibre reinforced plastics Description of yarn, fabric and prepreg defects Tolerances for linear measure and angular dimensions in the wood-working and wood-processing industry; change of dimensions due to the influence of moisture in the direction of thickness, width and length of particle-board, plywood and fibreboard Steel thimbles for fibre ropes Laminated Products; Vulcanized Fibre, Types Laminated Products; Vulcanized Fibre, Acceptance, Test Methods Plastic moulding materials; cellulose ester(CA, CP, CAB) thermoplastic moulding materials; classification and designation Cellulose ester (CA, CP, CAB) moulding materials; preparation of specimens and determination of their properties Belaying cleats for fibre ropes Ships and marine technology - Round or spiral plated man-made fibre ropes Fibre ropes - Splices - Definitions, safety requirements, test method Ships and marine technology Polypropylene fibre ropes made of yarns produced on bast fibre spinning systems Ships and marine technology Polypropylene fibre ropes, made of high-tensile multifilament Plastics piping systems for water supply or drainage and sewerage Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Recommended practice for installation; German version

DIN 83334-1999

DIN CEN/TS 14578-2003

给水或排水排污用塑料管道系统.基 于不饱和聚酯树脂(UP)的玻璃纤维 增强热固性塑料(GRP).安装的推荐 性实施规

DIN CEN/TS 14807-2005

塑料管道系统.基于不饱和聚酯树脂 (UP) 的 玻 璃 纤 维 增 强 热 固 性 塑 料 (GRP).地下 GRP-UP 管道的结构分析 指南

DIN CEN/TS 15365-2006

高级工业陶瓷.无化学反应环境的高 温条件下陶瓷纤维的机械性能.通过 冷端法测定儒变特性

DIN CEN/TS 15658-2007

高级工业陶瓷.无反应环境高温条件 下陶瓷纤维的机械特性.用热端法测 定儒变性能

DIN EN 1007-3-2002

高技术陶瓷.陶瓷复合材料.增强的试 验方法.第3部分:长纤维直径和横截 面 积 的 测 定 ; 德 文 版 本 EN 1007-3:2002

DIN EN 1007-4-2004

高级工业陶瓷.陶瓷复合材料.纤维增 强的试验方法.第4部分:环境温度下 长纤维的抗拉性能测定

DIN EN 1007-5-2003

高级工业陶瓷.陶瓷复合材料.增强纤 维的试验方法.第5部分:室温下复丝 束中长丝断开时的拉伸强度和拉伸 应变分

DIN EN 1013-2-1999

单层屋顶反光塑料型板.第2部分:玻 璃纤维增强聚酯树脂板(GF-UP)特殊 要求和试验方法

CEN/TS 14578:2003 Plastics piping systems Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Guidance for the structural analysis of buried GRP-UP pipelines; German version CEN/TS 14807:2004 Advanced technical ceramics Mechanical properties of ceramic fibres at high temperature in a non-reactive environment Determination of creep behaviour by the cold end method; German version CEN/TS 15365:2006 Advanced technical ceramics Mechanical properties of ceramic fibres at high temperature under non-reactive environment Determination of creep behaviour by the hot end method; German version CEN/TS 15658:2007 Advanced technical ceramics Ceramic composites; Methods of test for reinforcement Part 3: Determination of filament diameter and cross-section area; German version EN 1007-3:2002 Advanced technical ceramics Ceramic composites - Methods of test for reinforcement Part 4: Determination of tensile properties of filaments at ambient temperature; German version EN 1007-4:2004 Advanced technical ceramics Ceramic composites; Methods of test for reinforcements - Part 5: Determination of distribution of tensile strength and of tensile strain to failure of filaments within a multifilament tow at ambient temperature; German version EN 1007-5:2003 Light transmitting profiled plastic sheeting for single skin roofing - Part 2: Specific requirements and test

DIN EN 1094-1-1997

绝缘耐火产品.第1部分:陶瓷纤维制 品术语

DIN EN 1094-3-2003

隔热耐火产品.第3部分:陶瓷纤维隔 热制品的分类

DIN EN 1119-1996

塑料管道系统.玻璃纤维增强热固性 塑料(GFK)管和配件.密封性和耐柔 性连接和铰链连接磨损能力试验方 法

DIN EN 1120-1996

塑料管道系统.玻璃纤维增强热固性 塑料(GFK)管和配件.弯曲状态下管 道内壁抗化学腐蚀能力测定

DIN EN 1169-1999

混凝土预制件.玻璃纤维增强混凝土 工厂生产控制一般规则

DIN EN 1170-1-1998

混凝土预制件.玻璃纤维增强混凝土 的试验方法.第1部分:基质一致性的 测量.坍落试验法

DIN EN 1170-2-1998

混凝土预制件.玻璃纤维增强混凝土 用检验方法.第2部分:新鲜的玻璃纤 维混凝土中纤维含量的测定.冲洗试 验 混凝土预制件.玻璃纤维增强混凝土 试验方法.第3部分:喷射 GRC 中纤维 含量测量

DIN EN 1170-3-1998

methods for sheets of glass fibre reinforced polyester resin (GRP); German version EN 1013-2:1998 Insulating refractory products - Part 1: Terminology for ceramic fibre products; German version EN 1094-1:1997 Insulating refractory products - Part 3: Classification of insulating products made from ceramic fibres; German version EN 1094-3:2003 Plastics piping systems - Joints for glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods for leaktightness and resistance to damage of flexible and reduced articulation joints; German version EN 1119:1996 Plastics piping systems Glass-reinforced thermosetting plastics (GRP) pipes and fittings Determination of the resistance to chemical attack from the inside of a section in a deflected condition; German version EN 1120:1996 Precast concrete products - General rules for factory production control of glass-fibre reinforced cement; German version EN 1169:1999 Precast concrete products - Test method for glass-fibre reinforced cement - Part 1: Measuring the consistency of the matrix; "Slump test" method; German version EN 1170-1:1997 Precast concrete products - Test method for glass-fibre reinforced cement - Part 2: Measuring the fibre content in fresh GRC; "wash out test"; German version EN 1170-2:1997 Precast concrete products - Test method for glass-fibre reinforced cement - Part 3: Measuring the fibre content of sprayed GRC; German

DIN EN 1170-4-1998

混凝土预制件.玻璃纤维增强混凝土 试验方法.第4部分:抗弯强度测量.简 化抗弯试验法

DIN EN 1170-5-1998

混凝土预制件.玻璃纤维增强混凝土 试验方法.第5部分:抗弯强度测量.完 整抗弯试验法

DIN EN 1170-6-1998

混凝土预制件.玻璃纤维增强混凝土 试验方法.第6部分:浸入法水吸附和 干密度测定

DIN EN 1170-7-1998

混凝土预制件.玻璃纤维增强混凝土 试验方法.第7部分:湿度引起尺寸变 化极限值测量

DIN EN 12195-2-2001

道路车辆上的装载物固定装置.安全. 第2部分:人造纤维制成的捆绑网

DIN EN 1225-1996

塑料管道系统.玻璃纤维增强热固塑 料(GFK)管.潮湿蠕变系数测定和长 时期规定圆度稳定性计算

DIN EN 1226-1996

塑料管道系统.玻璃纤维增强热固塑 料(GFK)管.耐初始圆度变形验证方 法 塑料管道系统.玻璃纤维增强热固塑 料管(GFK).测定潮湿条件下环形件 持久变形性

DIN EN 1227-1998

version EN 1170-3:1997 Precast concrete products - Test method for glass-fibre reinforced cement - Part 4: Measuring bending strength; "simplified bending test" method; German version EN 1170-4:1997 Precast concrete products - Test method for glass-fibre reinforced cement - Part 5: Measuring bending strength; "complete bending test" method; German version EN 1170-5:1997 Precast concrete products - Test method for glass-fibre reinforced cement - Part 6: Determination of the absorption of water by immersion and determination of the dry density; German version EN 1170-6:1997 Precast concrete products - Test method for glass-fibre reinforced cement - Part 7: Measurement of extremes of dimensional variations due to moisture content; German version EN 1170-7:1997 Load restraint assemblies on road vehicles - Safety - Part 2: Web lashing made from man-made fibres; German version EN 12195-2:2000 Plastics piping systems Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the creep factor under wet conditions and calculation of the long-term specific ring stiffness; German version EN 1225:1996 Plastics piping systems Glass-reinforced thermosetting plastics (GRP) pipes - Test method to prove the resistance to initial ring deflection; German version EN 1226:1996 Plastics piping systems Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the

DIN EN 1228-1996

塑料管道系统.玻璃纤维增强热固塑 料(GFK)管.初始规定圆度稳定性测 定

DIN EN 1229-1996

塑料管道系统.玻璃纤维增强热固塑 料(GFK)管.管壁短期内压密封性验 证试验方法

DIN EN 12369-1-2001

木板.结构设计特征值.第1部分:OSB. 碎料板和纤维板

DIN EN 12467-2000 DIN EN 12562-1999

纤维水泥平板材.产品规范和试验方 法 纺织品.Para-aramid 多纤维纱.检验方 法

DIN EN 12575-1998

塑料.热固成形模塑化合物.SMC 中纤 维湿润级的测定

DIN EN 12576-1998

塑 料 . 纤 维 增 强 的 复 合 材 料.SMC,BMC 和 DMC 制模压试验板 件的备制

DIN EN 12590-1999 DIN EN 1261-1995 DIN EN 12654-1-1998 DIN EN 12654-2-1998

纺织品.全部或部分由合成纤维制成 的工业缝纫线

一般用途纤维绳索.大麻绳

纺织玻璃纤维.纱线.第1部分:标识 纺织玻璃纤维.纱线.第2部分:试验方 法和一般要求

long-term ultimate relative ring deflection under wet conditions; German version EN 1227:1997 Plastics piping systems Glass-reinforced thermosetting plastics (GRP) pipes - Determination of initial specific ring stiffness; German version EN 1228:1996 Plastics piping systems Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods to prove the leaktightness of the wall under short-term internal pressure; German version EN 1229:1996 Wood-based panels - Characteristic values for structural design - Part 1: OSB, particleboards and fibreboards; German version EN 12369-1:2001 Fibre-cement flat sheets - Product specifications and test methods; German version EN 12467:2000 Textiles - Para-aramid multifilament yarns - Test methods; German version EN 12562:1999 Plastics - Thermoset moulding compounds - Determination of the degree of fibre wet out in SMC; German version EN 12575:1998 Plastics - Fibre reinforced composites Preparation of compression moulded test plates of SMC, BMC and DMC; German version EN 12576:1998 Textiles - Industrial sewing threads made wholly or partly from synthetic fibres; German version EN 12590:1999 Fibre ropes for general service - Hemp; German version EN 1261:1995 Textile glass - Yarns - Part 1: Designation; German version EN 12654-1:1998 Textile glass - Yarns - Part 2: Methods of test and general specifications;

DIN EN 12654-3-1998

纺织玻璃纤维.纱线.第3部分:通用的 一般要求

DIN EN 12710-2006

纤维纸板筒.标称容量15~250升带锁 紧圈的活动头(开口)纸筒

DIN EN 12751-1999

纺织品.试验用纤维、 纱和织物的抽样

DIN EN 12763-2000

建筑物排水系统纤维水泥管道和配 件.尺寸和交货技术条件

DIN EN 12971-1-1999

增强纤维.纺织玻璃短纤维丝的规范. 第1部分:标识

DIN EN 12971-2-1999

增强纤维.纺织玻璃短纤维丝的规范. 第2部分:试验方法和一般要求

DIN EN 12971-3-1999

增强纤维.纺织玻璃短纤维丝的规范. 第3部分:技术要求

DIN EN 13002-2-1999

碳纤维长丝纱.第2部分:试验方法和 通用规范

DIN EN 13010-2003

包装.单元包装.硬质纤维板显示的尺 寸和要求

DIN EN 13121-4 Berichtigung 1-2007 DIN EN

地上用玻璃纤维增强塑料(GRP)储罐 和容器.第4部分:交付、安装和维 修.DIN EN 13121-4-2005技术勘误

建筑物隔热产品.工厂制木纤维制品.

German version EN 12654-2:1998 Textile glass - Yarns - Part 3: General requirements for general applications; German version EN 12654-3:1998 Fibreboard drums - Removable head (open head) drums with closing rings with a nominal capacity of 15 l to 250 l English version of DIN EN 12710:2006-08 Textiles - Sampling of fibres, yarns and fabrics for testing; German version EN 12751:1999 Fibre-cement pipes and fittings for discharge systems for buildings Dimensions and technical terms of delivery; German version EN 12763:2000 Reinforcements - Specification for textile glass chopped strands - Part 1: Designation; German version EN 12971-1:1999 Reinforcements - Specification for textile glass chopped strands - Part 2: Test methods and general requirements; German version EN 12971-2:1999 Reinforcements - Specification for textile glass chopped strands - Part 3: Specific requirements; German version EN 12971-3:1999 Carbon fibre yarns - Part 2: Test methods and general specifications; German version EN 13002-2:1999 Packaging - Unit packaging Dimensions and requirements for pegboard display; German version EN 13010:2003 GRP tanks and vessels for use above ground - Part 4: Delivery, installation and maintenance; German version EN 13121-4:2005, Corrigenda to DIN EN 13121-4:2005-03; German version EN 13121-4:2005/AC:2007 Thermal insulation products for

13168-2001

规范

DIN EN 13171 Berichtigung 1-2006

建筑物用绝热产品.工厂生产的木纤 维产品.规范

DIN EN 13171-2001

建筑物隔热产品.工厂制木纤维制品. 规范

DIN EN 13171/A1-2004

建筑物用热隔绝产品.工厂制木纤维 产品.规范

DIN EN 13280-2001

地上储存冷水用整体式和组合式玻 璃纤维增强储水池规范

DIN EN 13360-2003 DIN EN 13392-2001

橡胶或涂塑纤维.三语种术语

纺织材料.单纤维丝.线密度测定

DIN EN 13413-2002

地板弹性铺覆物.带填充纤维衬底的 聚氯乙烯地板铺覆物.规范

DIN EN 13421-2006

塑料.热模化合物.复合和增强纤维.压 模化合物的向异性能测定用试样制 备

DIN EN 13473-1-2001

增强.多轴多股纤维织物规范.第一部 分:命名

buildings - Factory made wood wool (WW) products - Specification; German version EN 13168:2001 Thermal insulation products for buildings - Factory made wood fibre (WF) products - Specification; German version EN 13171:2001, Corrigenda to DIN EN 13171:2001-10; German version EN 13171:2001/AC:2005 Thermal insulation products for buildings - Factory made wood fibre (WF) products - Specification; German version EN 13171:2001 Thermal insulation products for buildings - Factory made wood fibre (WF) products - Specification; German version EN 13171:2001/A1:2004 Specification for glass fibre reinforced cisterns of one piece and sectional construction, for the storage, above ground, of cold water; German version EN 13280:2001 Rubber- or plastics-coated fabrics Terminology; Trilingual version EN 13360:2002 Textiles Monofilaments Determination of linear density; German version EN 13392:2001 Resilient floor coverings - Polyvinyl chloride floor coverings on a filled fibrous backing - Specification; German version EN 13413:2001 Plastics - Thermoset moulding compounds Composites and reinforcement fibres - Preparation of specimens for determining the anisotropy of the properties of compression moulding composites English version of DIN EN 13421:2006-05 Reinforcement - Specifications for multi-axial multi-ply fabrics - Part 1: Designation; German version EN 13473-1:2001

DIN EN 13473-2-2001

增强.多轴多股纤维织物规范.第2部 分:试验方法和一般要求

DIN EN 13473-3-2001

增强.多轴多股纤维织物规范.第3部 分:特殊要求

DIN EN 13496-2003

建筑物热绝缘产品.玻璃纤维绝热网 机械特性测定

DIN EN 13864-2004

运动场表面.合成纤维网线抗拉强度 的测定

DIN EN 1393-1996

塑料管道系统.玻璃纤维增强热固性 塑料管(GFK).初始纵向拉伸性能测 定

DIN EN 1394-1996

塑料管道系统.玻璃纤维增强热固塑 料管(GFK).切线方向表面管头拉伸 性能测定

DIN EN 14020-1-2003

增强材料.玻璃纤维粗纱规范.第1部 分:命名

DIN EN 14020-2-2003

增强材料.玻璃纤维粗纱规范.第2部 分:试验方法和一般要求

DIN EN 14020-3-2003

增强材料.玻璃纤维粗纱规范.第3部 分:特殊要求

DIN EN 14053-2003

包装.波纹板或实心纤维纸板制成的 包装件

Reinforcement - Specifications for multi-axial multi-ply fabrics - Part 2: Methods of test and general requirements; German version EN 13473-2:2001 Reinforcement - Specifications for multi-axial multi-ply fabrics - Part 3: Specific requirements; German version EN 13473-3:2001 Thermal insulation products for building applications - Determination of the mechanical properties of glass fibre meshes; German version EN 13496:2002 Surfaces for sports areas Determination of tensile strength of synthetic yarns; German version EN 13864:2004 Plastics piping systems Glass-reinforced thermosetting plastics (GRP) pipes; Determination of initial longitudinal tensile properties; German version EN 1393:1996 Plastics piping systems Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the apparent initial circumferential tensile strength; German version EN 1394:1996 Reinforcements - Specification for textile glass rovings - Part 1: Designation; German version EN 14020-1:2002 Reinforcements - Specification for textile glass rovings - Part 2: Methods of test and general requirements; German version EN 14020-2:2002 Reinforcements - Specification for textile glass rovings - Part 3: Specific requirements; German version EN 14020-3:2002 Packaging - Packagings manufactured from corrugated or solid fibreboard Types and construction; German

DIN EN 14278-1-2004

纺织品.棉纤维黏性的测定.第1部分: 使用手工热检测设备的方法

DIN EN 14278-2-2004

纺织品.棉纤维黏性的测定.第2部分: 使用自动热检波板设备的方法

DIN EN 14278-3-2004

纺织品.棉纤维黏性的测定.第3部分: 使用自动热检波旋转鼓设备的方法

DIN EN 14362-2 Berichtigung 1-2005

纺织品.衍生自偶氮染色剂的特定芳 香胺的测定方法.第2部分:经纤维萃 取获得的偶氮染色剂使用的检 测.DIN EN 14

DIN EN 14362-2-2003

纺织品.衍生自偶氮染色剂的特定芳 香胺的测定方法.第2部分:通过萃取 纤维取得的偶氮染色剂使用的检测

DIN EN 1444-2001

纤维水泥管.敷设和现场施工指南

DIN EN 14447-2005

纤维增强塑料.玻璃垫增强热塑性塑 料.流动性和固化的测定

DIN EN 1447-1996

塑料管道系统.玻璃纤维增强热固塑 料管(GFK).内压耐久性能测定

DIN

EN

塑料管道系统.玻璃纤维增强热固塑

version EN 14053:2003 Textiles - Determination of cotton fibre stickiness - Part 1: Method using a manual thermodetection device; German version EN 14278-1:2004 Textiles - Determination of cotton fibre stickiness - Part 2: Method using an automatic thermodetection plate device; German version EN 14278-2:2004 Textiles - Determination of cotton fibre stickiness - Part 3: Method using an automatic thermodetection rotating drum device; German version EN 14278-3:2004 Textiles - Methods for determination of certain aromatic amines derived from azo colorants - Part 2: Detection of the use of certain azo colorants accessible by extracting the fibres; German version EN 14362-2:2003, Corrigenda to DIN EN 14362-2:2003-12; German version EN 14362-2:2003/AC:2005 Textiles - Methods for determination of certain aromatic amines derived from azo colorants - Part 2: Detection of the use of certain azo colorants accessible by extracting the fibres; German version EN 14362-2:2003 Fibre-cement pipelines - Guide for laying and on-site work practices; German version EN 1444:2000 Fibre reinforced plastics - Glass mat reinforced thermoplastics (GMT) Determination of flowability and solidification; German version of EN 14447:2005 Plastics piping systems Glass-reinforced thermosetting plastics (GRP) pipes - Determination of longterm resistance to internal pressure; German version EN 1447:1996 Plastics piping systems -

1448-1997

料(GFK)管.抗拉套管和顶尖与弹性 体密封件连接的结构类型检验方法

DIN EN 14488-3-2006

DIN EN 14488-5-2006

DIN EN 14488-7-2006

DIN EN 1449-1997

DIN EN 1450-1999

DIN EN 14525-2005

DIN EN 14649-2005

Glass-reinforced thermosetting plastics (GRP) components - Test methods to prove the design of rigid locked socket- and -spigot joints with elastomeric seals; German version EN 1448:1996 Testing sprayed concrete - Part 3: Flexural strengths (first peak, ultimate 检测喷射混凝土.第3部分:纤维钢筋 and residual) of fibre reinforced beam 梁的挠曲强度 (第一峰、 最后和残余) specimens English version of DIN EN 14488-3:2006-09 Testing sprayed concrete - Part 5: 喷射混凝土试验.第5部分:纤维钢筋 Determination of energy absorption 混凝土板样本的能量吸收能力的测 capacity of fibre reinforced slab specimens English version of DIN EN 定 14488-5:2006-08 Testing sprayed concrete - Part 7: Fibre 检测喷射混凝土.第7部分:纤维钢筋 content of fibre reinforced concrete English version of DIN EN 混凝土的纤维含量 14488-7:2006-08 Plastics piping systems Glass-reinforced thermosetting plastics 塑料管道系统.玻璃纤维增强热固塑 (GRP) components - Test methods to 料(GFK)管.已粘接套管和顶尖连接 prove the design of a cemented socket件结构类型检验方法 and -spigot joints; German version EN 1449:1996 Plastics piping systems Glass-reinforced thermosetting plastics 塑料管道系统.玻璃纤维增强的热固 (GRP) components - Test methods to 塑料部件(GFK).对采用螺栓固定的 prove the design of bolted flange joints 法兰连接点的设计进行验证的试验 (includes amendment A1:1998); 方法 German version EN 1450:1996 + A1:1998 Ductile iron wide tolerance couplings and flange adaptors for use with pipes 不同材料(球墨铸铁、灰铸铁、钢、 of different materials: Ductile iron, PVC-U、PE 和纤维水泥)管道用球墨 grey iron, steel, PVC-U, PE, 铸铁大公差联接器和法兰接头 fibre-cement; German version EN 14525:2004 Precast concrete products - Test 预制混凝土产品.水泥和混凝土中玻 method for strength retention of glass 璃纤维残留强力的试验方法(SIC 试 fibres in cement and concrete (SIC TEST); German version EN 验) 14649:2005

DIN EN 14650-2005

预浇铸混凝土产品.金属纤维混凝土 工厂生产控制通用规则

DIN EN 14684-2005 DIN EN 14685-2005 DIN EN 14686-2005 DIN EN 14687-2005 DIN EN 14704-3-2007

聚酯纤维绳索.双层编织结构

聚酰胺纤维绳索.双层编织结构

聚酯/聚烯烃双纤维的纤维绳索

混合聚烯烃纤维绳索

测定纺织物弹性.第3部分:窄带纤维

DIN EN 14768-2005

纤维板桶.公称容量为5l 到600l 带滑 动盖的可移动顶端(敞口)桶

DIN EN 14845-1-2007 DIN EN 14845-2-2006

混凝土纤维试验方法.第1部分:比对 混凝土 混凝土纤维试验方法.第2部分:混凝 土效果

DIN EN 14889-1-2006

混凝土纤维.第1部分:钢纤维.定义、 规 范和一致性

DIN EN 14889-2-2006

混凝土纤维.第2部分:纤维聚合物.定 义、规范和一致性

DIN EN 1492-1-2000

纺织吊索.安全.第1部分:普通化学纤 维织造的带状吊索

DIN EN 1492-2-2000

织物吊索.安全性.第2部分:普通化学 纤维制圆吊索

Precast concrete products - General rules for factory production control of metallic fibered concrete; German version EN 14650:2005 Polyester fibre ropes - Double braid construction; German version EN 14684:2004 Polyamide fibre ropes - Double braid construction; German version EN 14685:2004 Fibre ropes of polyester/polyolefin dual fibres; German version EN 14686:2004 Mixed polyolefin fibre ropes; German version EN 14687:2004 Determination of the elasticity of fabrics - Part 3: Narrow fabrics; English version of DIN EN 14704-3:2007-03 Fibreboard drums - Removable head (open head) drums with slip on lids with a nominal capacity of 5 l to 600 l; German version EN 14768:2005 Test methods for fibres in concrete Part 1: Reference concretes; German version EN 14845-1:2007 Test methods for fibres in concrete Part 2: Effect on concrete; English version of DIN EN 14845-2:2006-11 Fibres for concrete - Part 1: Steel fibres - Definitions, specifications and conformity; English version of DIN EN 14889-1:2006-11 Fibres for concrete - Part 2: Polymer fibres - Definitions, specifications and conformity; English version of DIN EN 14889-2:2006-11 Textile slings - Safety - Part 1: Flat woven webbing slings, made of man-made fibres, for general purpose use; German version EN 1492-1:2000 Textile slings - Safety - Part 2: Roundslings, made of man-made fibres, for general purpose use;

DIN EN 1492-4-2004

纺织吊索.安全.第4部分:通用天然和 人造纤维绳制起重吊索

DIN EN 15057-2006 DIN EN 15319-2007

纤维增强水泥薄板.耐冲击试验方法

纤维(石膏)灰泥工程设计的一般原则

DIN EN 1638-1997

塑料管道系统.玻璃纤维增强热固性 塑料(GFK)管.圆筒内压循环作用试 验方法

DIN EN 1787-2000

食品.用 ESR 分光光度法检测经过辐 射的含纤维素食品

DIN EN 181000-1995

一般规范.纤维光学分支器; 德文版 本 EN 181000:1994 空白详细规范.纤维光学分支器.型号: 非波长选择星型传送器; 德文版本 EN 181101:1994 空白详细规范.纤维光学分支器.型号: 非波长选择星形传送器; 德文版本 EN 181102:1994

DIN EN 181101-1995

DIN EN 181102-1995

DIN EN 1862-1997

塑料管道系统.玻璃纤维增强热固性 塑料管(GFK).在化学环境下存放后 相对蠕变系数的测定

DIN EN 186260-1998

分规范.光学纤维和光纤电缆的连接 器装置.SC 型

DIN EN 186290-1998

分规范.光学纤维和光纤电缆的连接 器装置.MPO 型

German version EN 1492-2:2000 Textile slings - Safety - Part 4: Lifting slings for general service made from natural and man-made fibre ropes; German version EN 1492-4:2004 Fibre cement profiled sheets - Impact resistance test method English version of DIN EN 15057:2006-09 General principles of design of fibrous (gypsum) plaster works; German version EN 15319:2007 Plastics piping systems Glass-reinforced thermosetting plastics (GRP) pipes - Test method for the effects of cyclic internal pressure; German version EN 1638:1997 Foodstuffs - Detection of irradiated food containing cellulose by ESR spectroscopy; German version EN 1787:2000 Generic specification: Fibre optic branching devices; German version EN 181000:1994 Blank detail specification: Fibre optic branching devices - Type: Non wavelength selective transmissive star; German version EN 181101:1994 Blank detail specification: Fibre optic branching devices - Type: Wavelength selective transmissive star; German version EN 181102:1994 Plastics piping systems Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the relative flexural creep factor following exposure to a chemical environment; German version EN 1862:1997 Sectional specification: Connector sets for optical fibres and cables - Type SC; German version EN 186260:1997 Sectional specification: Connector sets for optical fibres and cables - Type MPO; German version EN 186290:1997

DIN EN 1916-2003

未加筋、 钢纤维和加筋混凝土管和配 件

DIN EN 23035-1994

单面和单壁瓦楞纤维纸板.平面耐压 碎的测定 (ISO 3035:1982); 德文版 本 EN 23035:1994

DIN EN 2329-1993

航空航天.纺织玻璃纤维预浸带.测定 单位面积质量的试验方法

DIN EN 2330-1993

航空航天.纺织玻璃纤维预浸带.测定 易挥发物质的试验方法

DIN EN 2331-1993

航空航天.纺织玻璃纤维预浸带.测定 树脂含量、 纤维含量以及单位面积纤 维质量的试验方法

DIN EN 2332-1993

航空航天.纺织玻璃纤维预浸带.测定 树脂流动的试验方法

DIN EN 2374-1991

航空航天.玻璃纤维增强的模压件和 夹芯复合材料.试验板的生产

DIN EN 2377-1989

航空航天系列.玻璃纤维增强的塑料. 外表层间抗剪强度的测定

DIN EN 2378-1995

航空航天系列.纤维增强塑料.通过浸 入 测 定 吸 水 量 ; 德 文 版 本 EN 2378:1995 航空航天系列.纤维增强塑料.试验流 体 影 响 的 测 定 ; 德 文 版 本 EN 2489:1995 航空航天系列.碳纤维预浸带.单位面

DIN EN 2489-1995 DIN EN

Concrete pipes and fittings, unreinforced, steel fibre and reinforced; German version EN 1916:2002 Single-faced and single-wall corrugated fibreboard - Determination of flat crush resistance (ISO 3035:1982); German version EN 23035:1994 Aerospace series; textile glass fibre preimpregnates; test method for the determination of mass per unit area; german version EN 2329:1993 Aerospace series; textile glass fibre preimpregnates; test method for the determination of the content of volatile matter; german version EN 2330:1993 Aerospace series; textile glass fibre preimpregnates; test method for the determination of the resin and fibre content and mass of fibre per unit area; german version EN 2331:1993 Aerospace series; textile glass fibre preimpregnates; test method for the determination of the resin flow; german version EN 2332:1993 Aerospace series; glass fibre-reinforced mouldings and sandwich composites; production of test panels; german version EN 2374:1991 Aerospace series; glass fibre reinforced plastics; test method; determination of apparent interlaminar shear strength; german version EN 2377:1989 Aerospace series - Fibre reinforced plastics - Determination of water absorption by immersion; German version EN 2378:1995 Aerospace series - Fibre reinforced plastics - Determination of the action of test fluids; German version EN 2489:1995 Aerospace series - Carbon fibre

2557-1997

积重量测定

DIN EN 2558-1997

航空航天系列.碳纤维预浸渍物.易挥 发成份测定

DIN EN 2559-1997

航空航天系列.碳纤维预浸带.树脂成 份、 纤维成份以及单位面积纤维重量 测定

DIN EN 2560-1998

航空航天系列.碳纤维预浸渍.树脂流 的测定

DIN EN 2561-1995

航空航天系列.碳素纤维增强塑料.单 向塑料层压制品.纤维方向平行抗拉 试验; 德文版本 EN 2561:1995

DIN EN 2562-1997

航空航天系列.碳纤维增强塑料.单向 层压塑料.与纤维方向平行的弯曲试 验

DIN EN 2563-1997

航空航天系列.碳纤维增强塑料.单向 层压制品.表观层压间抗切强度测定

DIN EN 2564-1998

航空航天系列.碳纤维层压塑料.纤维 含量、树脂含量和气孔的测定

DIN EN 2597-1998

航空航天系列.碳纤维增强的塑料.无 向叠层材料.垂直纤维方向的拉力试 验

DIN EN 2743-2003

航空航天系列.纤维增强塑料.测试未 老化材料前的标准调整程序

preimpregnates - Determination of mass per unit area; German version EN 2557:1997 Aerospace series - Carbon fibre preimpregnates - Determination of the volatile content; German version EN 2558:1997 Aerospace series - Carbon fibre preimpregnates - Determination of the resin and fibre content and the mass of fibre per unit area; German version EN 2559:1997 Aerospace series - Carbon fibre preimpregnates - Determmination of the resin flow; German version EN 2560:1998 Aerospace series - Carbon fibre reinforced plastics - Unidirectional laminates - Tensile test parallel to the fibre direction; German version EN 2561:1995 Aerospace series - Carbon fibre reinforced plastics - Unidirectional laminates; flexural test parallel to the fibre direction; German version EN 2562:1997 Aerospace series - Carbon fibre reinforced plastics - Unidirectional laminates; determination of apparent interlaminar shear strength; German version EN 2563:1997 Aerospace series - Carbon fibre laminates - Determination of the fibre-, resin- and void contents; German version EN 2564:1998 Aerospace series - Carbon fibre reinforced plastics; unidirectional laminates - Tensile test perpendicular to the fibre direction; German version EN 2597:1998 Aerospace series - Fibre reinforced plastics - Standard procedures for conditioning prior to testing unaged materials; German and English version

DIN EN 2746-1998

航空航天系列.玻璃纤维增强的塑料. 绕曲试验.三点弯曲试验法

DIN EN 2747-1998

航空航天系列.玻璃纤维增强塑料.拉 伸试验

DIN 300-2006

EN

定向纤维板(OSB).定义、分类和规范

DIN EN 302-3-2006

承重木结构用粘合剂.试验方法.第3 部分:通过温度和湿度循环试验测定 木纤维酸性腐蚀对横向拉伸强度的 影响.德

DIN 316-1999

EN

木纤维板.定义、分类和符号

DIN 317-1993

EN

木屑板和纤维板.浸水厚度膨胀测定

DIN 319-1993

EN

木屑板和纤维板.垂直于板面的抗拉 强度测定

DIN 320-1993

EN

纤维板.螺钉轴向拔出力测定

DIN EN 3665-1997

航空航天系列.清漆和涂料试验方法. 铝合金耐纤维状腐蚀试验

DIN EN 3733-008-2007

航空航天系列.连续工作温度150° C 自锁紧环连接的单路圆形光连接器. 第008部分:EN4532(200mu/280mu 纤 维)的电

EN 2743:2001 Aerospace series - Glass fibre reinforced plastics - Flexural test, three point bend method; German version EN 2746:1998 Aerospace series - Glass fibre reinforced plastics - Tensile test; German version EN 2747:1998 Oriented Strand Boards (OSB) Definitions, classification and specifications English version of DIN EN 300:2006-09 Adhesives for load-bearing timber structures - Test methods - Part 3: Determination of the effect of acid damage to wood fibres by temperature and humidity cycling on the transverse tensile strength; German version EN 302-3:2004 + A1:2005 Wood fibreboards - Definition, classification and symbols; German version EN 316:1999 Particleboards and fibreboards; determination of swelling in thickness after immersion in water; German version EN 317:1993 Particleboards and fibreboards; determination of tensile strength perpendicular to the plane of the board; German version EN 319:1993 Fibreboards; determination of resistance to axial withdrawal of screws; German version EN 320:1993 Aerospace series - Test methods for paints and varnishes - Filiform corrosion resistance test on aluminium alloys; German version EN 3665:1997 Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 ° continuous C Part 008: Plug sub-assembly for cable to EN 4532 (200 ?m/280 ?m fibre) Product standard; German and English

DIN EN 3733-009-2007

航空航天系列.连续工作温度150° C 自锁紧环连接的单路圆形光学连接 器.第009部分:EN4532(200mu/280mu 纤维)的

DIN EN 382-1-1993

纤维板.表面吸湿性测定.经干燥处理 的纤维板试验方法

DIN EN 382-2-1994

纤维板.表面吸湿性测定.硬板试验方 法

DIN EN 40-7-2003

灯柱.第7部分:纤维增强聚酯复合灯 柱的要求

DIN 492-2006

EN

纤维混凝土石板及配件.产品规范和 试验方法

DIN 494-2007

EN

纤维水泥成型薄板及其配件.产品规 范和试验方法

DIN EN 50223-2001

易燃短纤维填料自动静电应用设备

DIN EN 50353-2002

绝缘油.用显微镜计数法测定纤维污 染

DIN EN 50377-2-1-2002

光纤通信系统接头组件和互连元件. 产 品 规 范 . 第 2-1 部 分 : 端 接 在 IEC 60793-2 B1类单模纤维上的 FC-PC 型 接头组件

version EN 3733-008:2006 Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 ° continuous C Part 009: Receptacle sub-assembly for cable to EN 4532 (200 ?m/280 ?m fibre) - Product standard; German and English version EN 3733-009:2006 Fibreboards; determination of surface absorption; part 1: test method for dry process fibreboards; German version EN 382-1:1993 Fibreboards; determination of surface absorption; part 2: test method for hardboards; German version EN 382-2:1993 Lighting columns Part 7: Requirements for fibre reinforced polymer composite lighting columns; German version EN 40-7:2002 Fibre cement slates and fittings Product specification and test methods; German version EN 492:2004 + A1:2005 + A2:2006 Fibre-cement profiled sheets and fittings - Product specification and test methods; German version EN 494:2004+A1:2005+A2:2006+A3:200 7 Automatic electrostatic application equipment for flammable flock material; German version EN 50223:2001 Insulating oil - Determination of fibre contamination by the counting method using a microscope; German version EN 50353:2001 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 2-1: Type FC-PC terminated on IEC 60793-2 category B1 singlemode fibre; German version

DIN EN 50377-5-1-2003

光纤通信系统中使用的连接器组和 互连元件.产品规范.第5-1部分:端接 在 IEC 60793-2类 B.1.1单模纤维上的 EC 型

DIN EN 50377-7-1-2004

光纤通信系统中使用的连接器组件 和互连元件.产品规范.第7-1部分:终 接在 IEC 60793-2 A1a 和 A1b 类多 模纤维上

DIN EN 50377-7-2-2004

光纤通信系统中使用的连接器组件 和互连元件.产品规范.第7-2部分:终 接在 IEC 60793-2 B1.1类单模纤维上 的 LC-P

DIN EN 50411-2-2-2007

光纤通信系统用纤维形成体和闭路. 产品规范.第2-2部分:S&A 类用1型密 封平盖纤维接缝闭路

DIN EN 50411-2-4-2006

用于光纤传递系统的纤维形成体和 闭路.产品规范.第2-4部分:S&A 类密 封圆盖纤维接缝闭路类型1

DIN EN 50414-2007

聚氯乙烯绝缘和护套光电纤维电缆 中铅含量分析试验方法.方法 A:用火 焰原子吸收分光光度测定含铅总量. 方法 B:硫

EN 50377-2-1:2001 Connector sets and interconnect components to be used in optical fibre communication systems - Product specification - Part 5-1: Type EC terminated on IEC 60793-2, category B1.1 singlemode fibre; German version EN 50377-5-1:2003 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 7-1: Type LC-PC duplex terminated on IEC 60793-2 category A1a and A1b multimode fibre; German version EN 50377-7-1:2004 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 7-2: LC-PC duplex terminated on IEC 60793-2 category B1.1 singlemode fibre; German version EN 50377-7-2:2004 Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 2-2: Sealed pan fibre splice closures Type 1, for category S & A; German version EN 50411-2-2:2007 Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 2-4: Sealed dome fibre splice closures Type 1, for category S & A; German version EN 50411-2-4:2006 Test methods for analysis of lead in PVC taken from insulation and sheath of electric and optical fibre cables Method A: Total lead content determination with flame excitation atomic absorption spectrometry Method B: Qualitative analysis of lead by lead sulphide staining; German version EN 50414:2006

DIN 512-1994

EN

纤维混凝土制品.承压管和连接件

DIN EN 512/A1-2002

纤维水泥制品.压力管道和接头.修改 件 A1:2001; 德 文 版 本 EN 512:1994/A1:2001

DIN EN 588-1-1996

纤维水泥污水管.第1部分:重力系统 用管、连接件和配件

DIN EN 588-2-2002

排水管和下水道纤维水泥管.第2部 分:人孔和检查室

DIN 59-1977

EN

玻璃纤维增强塑料.用巴氏(Barcol)硬 度测量仪测定硬度

DIN EN 60249-2-1-2000

印制电路基材.第2部分:规范.第1号规 范:高电气质量酚醛纤维素纸覆铜层 压板

DIN EN 60249-2-2-2000

印制电路基材.第2部分:规范.第2号规 范:经济质量酚醛纤维素纸覆铜层压 板

DIN EN 60249-2-3-2000

印制电路基材.第2部分:规范.第3号规 范:规定易燃性的环氧化合物纤维素 纸覆铜层压板(垂直燃烧试验)

Fibre-cement products - Pressure pipes and joints; German version EN 512:1994 Fibre-cement products - Pressure pipes and joints; Amendment A1:2001; German version EN 512:1994/A1:2001 Fibre-cement pipes for sewers and drains - Part 1: Pipes, joints and fittings for gravity systems; German version EN 588-1:1996 Fibre cement pipes for drains and sewers - Part 2: Manholes and inspection chambers; German version EN 588-2:2001 Glass Reinforced Plastics; Measurement of Hardness by Means of a Barcol Impressor Base materials for printed circuits Part 2: Specifications; Specification No. 1: Phenolic cellulose paper copper-clad laminated sheet, high electrical quality (IEC 60249-2-1:1985 + A1:1989 + A2:1993 + A3:1994 + A4:2000); German version EN 60249-2-1:1994 + A2:1994 + Corrig.:1994 + A3:1995 + A4:2000 Base materials for printed circuits Part 2: Specifications; Specification No. 2: Phenolic cellulose paper copper-clad laminated sheet, economic quality (IEC 60249-2-2:1985 + A1:1989 + A2:1990 + A3:1993 + A4:1994 + A5:2000); German version EN 60249-2-2:1994 + A3:1994 + Corrig.:1994 + A4:1995 + A5:2000 Base materials for printed circuits Part 2: Specifications; Specification No. 3: Epoxide cellulose paper copper-clad laminated sheet of defined flammability (vertical burning test) (IEC 60249-2-3:1987 + A1:1989 + A2:1993 + Corrig.:1994 + A3:1994 + A4:2000); German version EN

DIN EN 60249-2-4-2000

印制电路基材.第2部分:规范.第4号规 范:普通级环氧化合物编织玻璃纤维 覆铜层压板

DIN EN 60317-0-4-2006

特种绕组线规范.第0-4部分:一般要 求.玻璃纤维绕组浸树脂或浸清漆裸 扁铜线或漆包扁铜线

DIN EN 60317-0-5-2007

特种绕组线规范.第0-5部分:一般要 求.玻璃纤维编织树脂或浸漆的裸或 漆包扁铜线

DIN EN 60317-0-6-2007

特种绕组线规范.第0-6部分:一般要 求.玻璃纤维包浸树脂或浸清漆的裸 圆铜线或漆包圆铜线

DIN EN 60317-48-2000

特种绕组线规范.第48部分:温度指数 155的玻璃纤维缠绕树脂或清漆浸渍 裸圆铜线或漆包圆铜线

DIN EN 60317-49-2000

特种绕组线规范.第49部分:温度指数 180的玻璃纤维绕包树脂或漆浸渍裸 或漆包圆铜线

60249-2-3:1994 + A2:1994 + Corrig.:1994 + A3:1995 + A4:2000 Base materials for printed circuits Part 2: Specifications; Specification No. 4: Epoxide woven glass fabric copper-clad laminated sheet, general purpose grade (IEC 60249-2-4:1987 + A1:1989 + A2:1992 + A3:1993 + A4:1994 + A5:2000); German version EN 60249-2-4:1994 + A3:1994 + Corrig.:1994 + A4:1995 + A5:2000 Specifications for particular types of winding wires - Part 0-4: General requirements - Glass-fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire (IEC 60317-0-4:1997 + A1:1999 + A2:2005); German version EN 60317-0-4:1998 + A1:2000 + A2:2005 Specifications for particular types of winding wires - Part 0-5: General requirements - Glass-fibre braided resin or varnish impregnated, bare or enamelled rectangular copper wire (IEC 60317-0-5:2006); German version EN 60317-0-5:2007 Specifications for particular types of winding wires - Part 0-6: General requirements - Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire (IEC 60317-0-6:2001 + A1:2006); German version EN 60317-0-6:2001 + A1:2006 Specification for particular types of winding wires - Part 48: Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 155 (IEC 60317-48:1999); German version EN 60317-48:2000 Specifications for particular types of winding wires - Part 49: Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire,

DIN EN 60317-50-2000

特种绕组线规范.第50部分:温度指数 200的玻璃纤维绕包树脂或漆浸渍裸 或漆包圆铜线

DIN EN 60450-2005

新的和老化的纤维素电气绝缘材料 的粘均聚合度测量

DIN EN 60454-3-10-199 7

电工压敏胶带.第3部分:各型材料规 范.第10节:带橡胶制热固性胶的醋酸 丁酸纤维素薄膜胶带要求

DIN EN 60454-3-11-199 9

电工用压敏胶带.第3部分:各型材料 规范.第11页:带热固橡胶胶粘材料的 皱折纤维素纸和聚乙烯对酞酸盐薄 膜合成

DIN EN 60454-3-4-1999

电工用的热敏性粘胶带.第3部分:单 项材料规范.第4页:带热固橡胶粘合 剂的纤维素皱纹纸

DIN EN 60454-3-5-1999

电工用的热敏性粘胶带.第3部分:单 项材料规范.第5页:带热固橡胶粘合 剂的纤维素非皱纹纸

temperature index 180 (IEC 60317-49:1999); German version EN 60317-49:2000 Specifications for particular types of winding wires - Part 50: Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 200 (IEC 60317-50:1999); German version EN 60317-50:2000 Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials (IEC 60450:2004); German version EN 60450:2004 Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials; sheet 10: Requirements for cellulose-acetate-butyrate film tapes with rubber thermosetting adhesive (IEC 60454-3-10:1995); German version EN 60454-3-10:1995 Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials; Sheet 11: Combined tapes made of creped cellulosic paper and polyethylene terephthalate film with rubber thermosetting adhesive (IEC 60454-3-11:1998); German version EN 60454-3-11:1998 Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials; Sheet 4: Cellulosic paper, creped, with rubber thermosetting adhesive (IEC 60454-3-4:1998); German version EN 60454-3-4:1998 Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials; Sheet 5: Cellulosic paper, non-creped, with rubber thermosetting adhesive

DIN EN 60454-3-8 Berichtigung 1-2007

电工用压敏粘带.第3部分:单项材料 规范.活页8:玻璃布涂压敏粘合剂的 和独立的醋酸纤维素或与纤维胶结 合的编织

DIN EN 60454-3-8-2006

电工用压敏胶粘带.第3部分:单项材 料规范.活页8:涂有基于玻璃纤维、 醋 酯纤维素或组合有粘胶纤维的压敏 胶粘剂

DIN EN 60554-2-2002

电工用纤维素纸.第2部分:试验方法 (IEC 60554-2:2001); 德 文 版 本 EN 60554-2:2002

DIN EN 60684-3-300-20 03

绝缘软管.第3部分:各型软管规范.300 节:无涂层玻璃纤维编织软管

DIN EN 60684-3-340 bis 342-2004

绝缘软套管.第3部分:各种型号套管 的规范.第340至342活页:可扩张编织 的聚对苯二甲酸乙二醇酯纤维套管

DIN EN 60684-3-343 bis 345-2003

绝缘软管.第3部分:各型软管规范.343 至345节:无涂层可扩张乙烯三氟氯乙 烯纤维编织软管

(IEC 60454-3-5:1998); German version EN 60454-3-5:1998 Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 8: Woven fabric tapes with pressure-sensitive adhesive based on glass, cellulose acetate alone or combined with viscose fibre (IEC 60454-3-8:2006); German version EN 60454-3-8:2006, Corrigenda to DIN EN 60454-3-8 (VDE 0340-3-8):2006-12; CENELEC-Corrigendum December 2006 to EN 60454-3-8:2006 Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 8: Woven fabric tapes with pressure-sensitive adhesive based on glass, cellulose acetate alone or combined with viscose fibre (IEC 60454-3-8:2006); German version EN 60454-3-8:2006 Cellulosic papers for electrical purposes - Part 2: Methods of test (IEC 60554-2:2001); German version EN 60554-2:2002 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheet 300: Glass textile fibre sleeving, braided, uncoated (IEC 60684-3-300:2002); German version EN 60684-3-300:2002 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 340 to 342: Expandable braided polyethylene terephthalate textile sleeving (IEC 60684-3-340 to 342:2003); German version EN 60684-3-340 bis 342:2003 Flexible insulating sleeving - Part 3: Specification for individual types of sleeving; Sheets 343 to 345:

DIN EN 60684-3-400 bis 402-2003

绝缘软管.第3部分:各型软管规范.400 至402节:带硅弹性涂层的玻璃纤维软 管

DIN EN 60684-3-403 bis 405-2003

绝缘软管.第3部分:各型软管规范.403 至405节:丙烯酸酯玻璃纤维编织软管

DIN EN 60684-3-406 bis 408-2004

绝缘软管.第3部分:各种型号软管规 范.活页406-408:带 PVC 涂层的玻璃 纤维编织软管

DIN EN 60684-3-420 bis 422-2003

绝缘软管.第3部分:各型软管规范.420 至422节:丙烯酸酯聚酯纤维软管

DIN EN 60793-1-20-200 2

光纤.第1-20部分:测量方法和试验程 序 . 纤 维 几 何 形 状 (IEC 60793-1-20:2001); 德 文 版 本 EN 60793-1-20:2002 光纤.第1-30部分:测量方法和试验程 序 . 纤 维 验 证 试 验 (IEC 60793-1-30:2001); 德 文 版 本 EN 60793-1-30:2002 光纤.第1-34部分:测量方法和试验程

DIN EN 60793-1-30-200 2 DIN EN

Expandable braided ethylene chlorotrifluoroethylene (E-CTFE) textile sleeving, uncoated (IEC 60684-3-343 to 345:2002); German version EN 60684-3-343 to 345:2002 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheets 400 to 402: Glass textile sleeving with silicone elastomer coating (IEC 60684-3-400 to 402:2002); German version EN 60684-3-400 bis 402:2002 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheets 403 to 405: Glass textile sleeving with acrylic coating (IEC 60684-3-403 to 405:2002); German version EN 60684-3-403 to 405:2002 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 406 to 408: Glass textile sleeving with PVC coating (IEC 60684-3-406 bis 408:2003); German version EN 60684-3-406 bis 408:2003 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheets 420 to 422: Polyethylene terephthalate textile sleeving with acrylic based coating (IEC 60684-3-420 to 422:2002); German version EN 60684-3-420 bis 422:2002 Optical fibres Part 1-20: Measurement methods and test procedures; Fibre geometry (IEC 60793-1-20:2001); German version EN 60793-1-20:2002 Optical fibres Part 1-30: Measurement methods and test procedures; Fibre proof test (IEC 60793-1-30:2001); German version EN 60793-1-30:2002 Optical fibres Part 1-34:

60793-1-34-200 7

序.纤维卷曲(IEC 60793-1-34-2006)

DIN EN 60793-1-41-200 4

光学纤维.第1-41部分:测量方法和试 验程序.频带宽度

DIN EN 60793-2-2004

光学纤维.第2部分:产品规范.总则

DIN EN 60793-2-40-200 7

光纤.第2-40部分:产品规范.A4类别 的 多 模 纤 维 分 规 范 (IEC 60793-2-40-2006)

DIN EN 60793-2-50-200 5

光学纤维.第2-50部分:产品规范.B 级 单模光纤分规范

DIN EN 60794-2-10-200 3

光学纤维电缆.第2-10部分:室内光缆. 单工光缆和双工光缆的系列规范

DIN EN 60794-2-20-200 3

光学纤维电缆.第2-20部分:室内光缆. 多纤配线电缆的系列规范

DIN EN 60794-2-30-200 3

光学纤维电缆.第2-30部分:室内光缆. 带状光缆系列规范

DIN EN 60794-2-31-200 6

光学纤维电缆.第2-31部分:室内电缆. 建筑群布缆用光纤带状电缆的详细 规范(IEC 60794-2-31:2005)

Measurement methods and test procedures - Fibre curl (IEC 60793-1-34:2006); German version EN 60793-1-34:2006 Optical fibres Part 1-41: Measurement methods and test procedures Bandwidth (IEC 60793-1-41:2003); German version EN 60793-1-41:2003 Optical fibres - Part 2: Product specifications General (IEC 60793-2:2003); German version EN 60793-2:2004 Optical fibres - Part 2-40: Product specifications - Sectional specification for category A4 multimode fibres (IEC 60793-2-40:2006); German version EN 60793-2-40:2006 Optical fibres - Part 2-50: Product specifications - Sectional specification for class B single-mode fibres (IEC 60793-2-50:2004); German version EN 60793-2-50:2004 + Corrigendum:2004 Optical fibre cables - Part 2-10: Indoor cables - Family specification for simplex and duplex cables (IEC 60794-2-10:2003); German version EN 60794-2-10:2003 Optical fibre cables - Part 2-20: Indoor cables; Family specification for multi-fibre optical distribution cables (IEC 60794-2-20:2003); German version EN 60794-2-20:2003 Optical fibre cables - Part 2-30: Indoor cables; Family specification for optical fibre ribbon cables (IEC 60794-2-30:2003); German version EN 60794-2-30:2003 Optical fibre cables - Part 2-31: Indoor cables - Detailed specification for optical fibre ribbon cables for use in premises cabling (IEC 60794-2-31:2005); German version

DIN EN 60819-1-1997

非纤维素电工纸.第1部分:定义和一 般要求

DIN EN 60819-2-2002

电工用非纤维素纸.第2部分:试验方 法

DIN EN 60819-3-1-2002

电工用非纤维素纸.第3部分:专用材 料 规 范 : 第 1 页 : 填 充 玻 璃 纸 (IEC 60819-3-1:2001); 德 文 版 本 EN 60819-3-1:2

DIN EN 60819-3-2-2002

电工用非纤维素纸.第3部分:专用材 料规范:第2页:混合式无机-有机纸 (IEC 60819-3-2:2001); 德文版本 EN 6081

DIN EN 60819-3-3-2007

电工用非纤维素纸.第3部分:单项材 料规范.活页3:非填充聚芳酰胺纸

DIN EN 60819-3-4-2002

电工用非纤维素纸.第3部分:专用材 料规范:第4页:含有不超过50%云母 颗 粒 的 芳 族 聚 酰 胺 纤 维 纸 (IEC 60819-3-4:2

DIN EN 60869-1-2001

纤维光学衰减器.第1部分:总规范

DIN EN 60874-1-2007 DIN EN 61067-1-1998

纤维光学和光缆的连接器.第1部分: 总规范 玻璃和玻璃聚酯纤维编织带规范.第1 部分:定义、分类和一般要求

EN 60794-2-31:2006 Non-cellulosic papers for electrical purposes - Part 1: Definitions and general requirements (IEC 60819-1:1995 + A1:1996); German version EN 60819-1:1995 + A1:1996 Non-cellulosic papers for electrical purposes - Part 2: Methods of test (IEC 60819-2:2001); German version EN 60819-2 2001 Non-cellulosic papers for electrical purposes - Part 3: Specifications for individual materials; Sheet 1: Filled glass paper (IEC 60819-3-1:2001); German version EN 60819-3-1:2001 Non-cellulosic papers for electrical purposes - Part 3: Specifications for individual materials; Sheet 2: Hybrid inorganic-organic paper (IEC 60819-3-2:2001); German version EN 60819-3-2:2001 Non-cellulosic papers for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Unfilled aramid (aromatic polyamide) papers (IEC 60819-3-3:2006); German version EN 60819-3-3:2006 Non-cellulosic papers for electrical purposes - Part 3: Specifications for individual materials; Sheet 4: Aramid fibre paper containing not more than 50 % of mica particles (IEC 60819-3-4:2001); German version EN 60819-3-4:2001 Fibre optic attenuators - Part 1: Generic specification (IEC 60869-1:1999); German version EN 60869-1:2000 Connectors for optical fibres and cables - Part 1: Generic specification (IEC 60874-1:2006); German version EN 60874-1:2007 Specification for glass and glass polyester fibre woven tapes - Part 1:

DIN EN 61067-2-1998

DIN EN 61067-3-1-1998

DIN EN 61068-1-1998

DIN EN 61068-2-1998

DIN EN 61068-3-1-1998

DIN EN 61197-1996

DIN EN 61202-1-2001

DIN EN 61249-2-1-2005

DIN EN 61249-2-10

Definitions, classification and general requirements (IEC 61067-1:1991); German version EN 61067-1:1997 Specification for glass and glass 玻璃和玻璃聚酯纤维编织带规范.第2 polyester fibre woven tapes - Part 2: Methods of test (IEC 61067-2:1992); 部分:试验方法 German version EN 61067-2:1997 Glass and glass polyester fibre woven 玻璃和玻璃聚酯纤维编织带规范.第3 tapes - Part 3: Specifications for 部分:各型材料规范.第1节:1、2、3型 individual materials; Sheet 1: Type 1, 2 and 3 tapes (IEC 61067-3-1:1995); 织带 German version EN 61067-3-1:1995 Specification for polyester fibre woven tapes - Part 1: Definitions, designation 聚酯纤维编织带规范.第1部分:定义、 and general requirements (IEC 命名和一般要求 61068-1:1991); German version EN 61068-1:1997 Specification for polyester fibre woven 聚酯纤维编织带规范.第2部分:试验 tapes - Part 2: Methods of test (IEC 61068-2:1991); German version EN 方法 61068-2:1997 Polyester fibre woven tapes - Part 3: Specifications for individual materials; 聚酯纤维编织带.第3部分:各型材料 Sheet 1: Tapes woven on conventional or shuttleless looms (IEC 规范.第1节:常规或无梭织机编织带 61068-3-1:1995); German version EN 61068-3-1:1995 Insulating liquids - Linear flame 绝缘油.火焰线性传播.玻璃纤维试验 propagation - Test methods using a glass-fibre tape (IEC 61197:1993); 方法 German version EN 61197:1994 Fibre optic isolators - Part 1: Generic specification (IEC 61202-1:2000); 纤维光绝缘子.第1部分:一般规范 German version EN 61202-1:2000 Materials for printed boards and other interconnecting structures - Part 2-1: Reinforced base materials, clad and 印制板和其它互连结构用材料.第2-1 unclad - Phenolic cellulose paper 部分:包被和非包被增强基材.经济级 reinforced laminated sheets, economic 包铜酚醛纤维素纸增强叠层板材 grade, copper clad (IEC 61249-2-1:2005); German version EN 61249-2-1:2005 印 制 板 和 其 它 互 联 结 构 用 材 料 . 第 Materials for printed boards and other 2-10部分:包被和非包被增强基材.阻 interconnecting structures - Part 2-10:

Berichtigung 1-2005

燃型(垂直燃烧试验)铜包被改良或未 改良的

DIN EN 61249-2-10-200 4

印制板和其它互连结构用材料.第 2-10部分:包被和非包被增强基材.规 定了易燃性的包铜的改良或未改良 的氰酸酯

DIN EN 61249-2-11 Berichtigung 1-2005

印制板和其他互联结构用材料.第 2-11部分:包被和非包被增强基材.阻 燃型(垂直燃烧试验)铜包被的聚酰亚 胺溴化

DIN EN 61249-2-11-200 4

印制板和其它互连结构用材料.第 2-11部分:包被和非包被增强基材料. 阻燃型铜包被的聚酰亚胺溴化环氧 改良或非

DIN EN 61249-2-18-200 2

印制板和其它互连结构用材料.第 2-18部分:包层或非包层增强式基材 料.规定的可燃性包铜聚酯非编织玻 璃纤维增

Reinforced base materials clad and unclad - Cyanate ester, brominated epoxide, modified or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad; (IEC 61249-2-10:2003); German version EN 61249-2-10:2003, Corrigenda to DIN EN 61249-2-10:2004-01 Materials for printed boards and other interconnecting structures - Part 2-10: Reinforced base materials clad and unclad - Cyanate ester, brominated epoxide, modified or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad (IEC 61249-2-10:2003); German version EN 61249-2-10:2003 Materials for printed boards and other interconnecting structures - Part 2-11: Reinforced base materials, clad and unclad - Polyimide, brominated epoxide modified or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad(IEC 61249-2-11:2003); German version EN 61249-2-11:2003, Corrigenda to DIN EN 61249-2-11:2004-06 Materials for printed boards and other interconnecting structures - Part 2-11: Reinforced base materials, clad and unclad - Polyimide, brominated epoxide modified or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad (IEC 61249-2-11:2003); German version EN 61249-2-11:2003 Materials for printed boards and other interconnecting structures - Part 2-18: Reinforced base materials clad and unclad; Polyester non-woven

DIN EN 61249-2-19-200 2

印制板和其它互连结构用材料.第 2-19部分:包层和非包层增强式基材 料.规定的可燃性环氧交叉帘布层线 性加筋纤

DIN EN 61249-2-2-2005

印制板和其它互连结构用材料.第2-2 部分:包被和非包被增强基材.高电气 级包铜酚醛纤维素纸增强叠层板材

DIN EN 61249-2-21-200 4

印制板和其它互连结构用材料.第 2-21部分:包被和非包被增强基材料. 阻燃型铜包被的非卤代环氧编织 E 型玻璃纤维

DIN EN 61249-2-22-200 5

印制板和其他互连结构用材料.第 2-22部分:包被和非包被增强基材.阻 燃型铜包被的改良非卤化环氧编织 E 型玻璃纤

DIN EN 61249-2-23-200 5

印制板和其他互连结构用材料.第 2-23部分:包被和非包被增强基材.经 济级包铜非卤化酚醛纤维素纸增强 层压板材

fibreglass laminated sheet of defined flammability (vertical burning test), copper-clad (IEC 61249-2-18:2002); German version EN 61249-2-18:2002 Materials for printed boards and other interconnecting structures - Part 2-19: Reinforced base materials, clad and unclad; Epoxide cross-plied linear fibreglass-reinforced laminated sheets of defined flammability (vertical burning test), copper clad (IEC 61249-2-19:2001); German version EN 61249-2-19:2002 Materials for printed boards and other interconnecting structures - Part 2-2: Reinforced base materials, clad and unclad - Phenolic cellulose paper reinforced laminated sheets, high electrical grade, copper-clad (IEC 61249-2-2:2005); German version EN 61249-2-2:2005 Materials for printed boards and other interconnecting structures - Part 2-21: Reinforced base materials, clad and unclad - Non-halogenated epoxide woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad (IEC 61249-2-21:2003); German version EN 61249-2-21:2003 Materials for printed boards and other interconnecting structures - Part 2-22: Reinforced base materials clad and unclad - Modified non-halogenated epoxide woven E-glass laminated sheets of defined flammability (vertical burning test), copper-clad (IEC 61249-2-22:2005); German version EN 61249-2-22:2005 Materials for printed boards and other interconnecting structures - Part 2-23: Reinforced base materials, clad and unclad - Non-halogenated phenolic cellulose paper reinforced laminated

DIN EN 61249-2-26-200 5

印制板和其他互连结构用材料.第 2-26部分:包被和非包被增强基材.阻 燃型铜包被的非卤化环氧非编织/编 织 E 型玻

DIN EN 61249-2-4-2002

印制板和其它互连结构用材料.第2-4 部分:包层和非包层增强式基材料.规 定的可燃性包铜聚酯非编织/编织玻 璃纤

DIN EN 61249-2-5 Berichtigung 1-2005

印制板和其他互联结构用材料.第2-5 部分:包被和非包被增强基材.阻燃型 (垂直燃烧试验)铜包被的溴化环氧纤 维素

DIN EN 61249-2-5-2004

印制板和其它互连结构用材料.第2-5 部分:包被和非包被增强基材料.阻燃 型铜包被的溴化环氧纤维素纸增强 芯/编

DIN EN 61249-2-6-2004

印制板和其它互连结构用材料.第2-6 部分:包被和非包被增强基材料.阻燃

sheets, economic grade, copper-clad (IEC 61249-2-23:2005); German version EN 61249-2-23:2005 Materials for printed boards and other interconnecting structures - Part 2-26: Reinforced base materials, clad and unclad - Non-halogenated epoxide non-woven/woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad (IEC 61249-2-26:2005); German version EN 61249-2-26:2005 Materials for printed boards and other for interconnecting structures - Part 2-4: Reinforced base materials, clad and unclad; Polyester non-wowen/woven fibreglass laminated sheet of defined flammability (vertical burning test), copper-clad (IEC 61249-2-4:2001); German version EN 61249-2-4:2002 Materials for printed boards and other interconnecting structures - Part 2-5: Reinforced base materials, clad and unclad - Brominated epoxide cellulose paper reinforced core/woven E-glass reinforced surfaces laminated sheets of defined flammability (vertical burning test), copper-clad (IEC 61249-2-5:2003); German version EN 61249-2-5:2003, Corrigenda to DIN EN 61249-2-5:2004-06 Materials for printed boards and other interconnecting structures - Part 2-5: Reinforced base materials, clad and unclad - Brominated epoxide cellulose paper reinforced core/woven E-glass reinforced surfaces laminated sheets of defined flammability (vertical burning test), copper-clad (IEC 61249-2-5:2003); German version EN 61249-2-5:2003 Materials for printed boards and other interconnecting structures - Part 2-6:

型铜包被的溴化环氧非编织/编织 E 型玻璃

DIN EN 61249-2-8-2004

印制板和其它互连结构用材料.第2-8 部分:包被和非包被增强基材.规定了 易燃性的包铜的改良溴化环氧树脂 编织玻

DIN EN 61249-2-9-2004

印制板和其它互连结构用材料.第2-9 部分:包被和非包被增强基材.规定了 易燃性的包铜的二顺丁烯二酰亚胺/ 三嗪

DIN EN 61274-1-1-2007

纤维光学连接器用适配器.第1-1部 分:空白详细规范

DIN EN 61280-1-1-1999

纤维光学通信子系统基本试验程序. 第1部分:一般通信子系统的试验程序

DIN EN 61280-1-4-2003

光纤通信子系统试验程序.第1-4部 分:一般通信子系统.多模纤维激光发 射机用二维近场数据的采集和整理

Reinforced base materials, clad and unclad Brominated epoxide non-woven/woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad (IEC 61249-2-6:2003); German version EN 61249-2-6:2003 Materials for printed boards and other interconnecting structures - Part 2-8: Reinforced base materials, clad and unclad - Modified brominated epoxide woven fibreglass reinforced laminate sheets of defined flammability (vertical burning test), copper-clad (IEC 61249-2-8:2003); German version EN 61249-2-8:2003 Materials for printed boards and other interconnecting structures - Part 2-9: Reinforced base materials clad and unclad Bismaleimide/triazine, modified epoxide or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad (IEC 61249-2-9:2003); German version EN 61249-2-9:2003 Adaptors for fibre optic connectors Part 1-1: Blank detail specification (IEC 61274-1-1:2006); German version EN 61274-1-1:2006 Fibre optic communication subsystem basic test procedures - Part 1-1: Test procedures for general communication subsystems - Transmitter output optical power measurement for single-mode optical fibre cable (IEC 61280-1-1:1998); German version EN 61280-1-1:1998 Fibre optic communication subsystem test procedures - Part 1-4: General communication subsystems; Collection and reduction of two-dimensional nearfield data for multimode fibre laser transmitters (IEC 61280-1-4:2003);

DIN EN 61280-2-1-1999

纤维光学通信子系统基本试验程序. 第2-1部分:数字系统的试验程序.接 收机灵敏度和过载测量

DIN EN 61280-2-10-200 6

纤维光学通信子系统试验程序.第 2-10部分:数字系统.激光发射机的时 间分辨线性调频脉冲和 α 因数测量 (IEC 6128

DIN EN 61280-2-4-1999

纤维光学通信子系统基本试验程序. 第2-4部分:数字系统试验程序.比特 率容差测量

DIN EN 61280-2-5-1999

纤维光学通信子系统基本试验程序. 第2-5部分:数字系统试验程序.抖动 转移功能的测量

DIN EN 61280-2-8-2004

纤维光学通信子系统试验程序.数字 系统.第2-8部分:用品质因数测量法 测定低位错率

DIN EN 61290-3-2-2003

光学(纤维)放大器.第3-2部分:噪音 数字参数的试验方法.电频谱分析仪 法

DIN EN 61300-1-2004

纤维光学互连器件和无源元件.基本 试验和测量程序.第1部分:总则和指 南

DIN EN 61300-2-1-2003

纤维光学互连装置和无源部件.基本 试验和测量步骤.第2-1部分:振动(正

German version EN 61280-1-4:2003 Fibre optic communication subsystem basic test procedures - Part 2-1: Test procedures for digital systems; receiver sensitivity and overload measurement (IEC 61280-2-1:1998); German version EN 61280-2-1:1999 Fibre optic communication subsystem test procedures - Part 2-10: Digital systems - Time-resolved chirp and alpha-factor measurement of laser transmitters (IEC 61280-2-10:2005); German version EN 61280-2-10:2005 Fibre optic communication subsystem basic test procedures - Part 2-4: Test procedures for digital systems; bit-rate tolerance measurement (IEC 61280-2-4:1998); German version EN 61280-2-4:1998 Fibre optic communication subsystem basic test procedures - Part 2-5: Test procedures for digital systems; jitter transfer function measurement (IEC 61280-2-5:1998); German version EN 61280-2-5:1998 Fibre optic communication subsystem test procedures - Digital systems - Part 2-8: Determination of low BER using Q-factor measurements (IEC 61280-2-8:2003); German version EN 61280-2-8:2003 Optical amplifiers - Part 3-2: Test methods for noise figure parameters Electrical spectrum analyzer method (IEC 61290-3-2:2003); German version EN 61290-3-2:2003 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 1: General and guidance (IEC 61300-1:2003); German version EN 61300-1:2003 Fibre Optic interconnecting devices and passive components - Basic test

弦)试验

DIN EN 61300-2-16-200 7

纤维光学互连器件和无源元件.基本 试验和测量程序.第2-16部分:试验.霉 菌生长

DIN EN 61300-2-18-200 6

纤维光学互连器件和无源元件.基本 试验和测量程序.第2-18部分:试验.干 热.耐高温性

DIN EN 61300-2-33-200 7

纤维光学互联装置和无源部件.基本 试验和测量程序.第2-33部分:试验.纤 维光学外壳的安装和拆卸

DIN EN 61300-2-37-200 7

纤维光学互连器件和无源元件.基本 试验和测量程序.第2-37部分:试验.纤 维光学外壳的光缆弯曲

DIN EN 61300-2-38-200 7

纤维光学互连器件和无源元件.基本 试验和测量程序.第2-38部分:试验.加 压纤维光学接线盒的密封

DIN EN 61300-2-4-1998

光纤互联装置和无源部件.基本试验 和测量程序.第2-4部分:试验:纤维/电 缆牢固性 (IEC 61300-2-4:1995); 德 文 纤维光学互连器件和无源元件.基本 试验和测量程序.第2-44部分:试验.纤 维 光 学 器 件 应 力 消 除 的 挠 曲 (IEC

DIN EN 61300-2-44-200 5

and measurement procedures - Part 2-1: Tests; Vibration (sinusoidal) (IEC 61300-2-1:2003); German version EN 61300-2-1:2003 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-16: Tests - Mould growth (IEC 61300-2-16:2006); German version EN 61300-2-16:2006 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-18: Tests - Dry heat - High temperature endurance (IEC 61300-2-18:2005); German version EN 61300-2-18:2005 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-33: Tests - Assembly and disassembly of fibre optic closures (IEC 61300-2-33:2006); German version EN 61300-2-33:2007 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-37: Tests - Cable bending for fibre optic closures (IEC 61300-2-37:2006); German version EN 61300-2-37:2007 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-38: Tests - Sealing for pressurized fibre optic closures (IEC 61300-2-38:2006); German version EN 61300-2-38:2006 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-4: Tests: Fibre/cable retention (IEC 61300-2-4:1995); German version EN 61300-2-4:1997 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-44:

61300-2

DIN EN 61300-2-46-200 7

纤维光学互连器件和无源元件.基本 试验和测量程序.第2-46部分:试验.湿 气热循环

DIN EN 61300-2-47-200 7

纤维光学互连器件和无源元件.基本 试验和测量程序.第2-47部分:试验.热 冲击

DIN EN 61300-2-48-200 3

纤维光学互连器件和无源元件.基本 试验和测量程序.第2-48部分:试验.温 度-湿度循环

DIN EN 61300-3-10-200 7

纤维光学互联装置和无源部件.基本 试验和测量程序.第3-10部分:检验和 测量.量规的保持力

DIN EN 61300-3-14-200 7

纤维光学互连装置和无源元件.基本 试验和测量程序.第3-14部分:检验和 测量.可变衰减器衰减设置的精确性 和重复

DIN EN 61300-3-15-200 7

纤维光学互连装置和无源元件.基本 试验和测量程序.第3-15部分:检验和 测量.凸形抛光金属环端面圆顶偏心 率(IEC

Tests - Flexing of the strain relief of fibre optic devices (IEC 61300-2-44:2004); German version EN 61300-2-44:2005 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-46: Tests - Damp heat cyclic (IEC 61300-2-46:2006); German version EN 61300-2-46:2006 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-47: Tests - Thermal shocks (IEC 61300-2-47:2006); German version EN 61300-2-47:2007 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-48: Tests; Temperature-humidity cycling (IEC 61300-2-48:2003); German version EN 61300-2-48:2003 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-10: Examinations and measurements Gauge retention force (IEC 61300-3-10:2006); German version EN 61300-3-10:2007 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-14: Examinations and measurements Accuracy and repeatability of the attenuation settings of a variable attenuator (IEC 61300-3-14:2006); German version EN 61300-3-14:2007 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-15: Examinations and measurements Dome eccentricity of a convex polished ferrule endface (IEC 61300-3-15:2006); German version

DIN EN 61300-3-17-200 0

纤维光学互连器件和无源元件.基本 试验和测量程序.第3-17部分:检查和 测量.角度抛光套圈的端面角

DIN EN 61300-3-2-2000

纤维光学互连器件和无源元件.基本 试验和测量程序.第3-2部分:检查和 测量.单模纤维光学器件衰减偏振函 数

DIN EN 61300-3-20-200 2

纤维光学互连器件和无源元件.基本 试验和测量程序.第3-20部分:检查和 测量.光纤分路设备的指向性

DIN EN 61300-3-23-199 9

光纤互联装置和无源部件.基本试验 和测量程序.第2-23部分:检验和测量. 相对于金属端面的纤维位置

DIN EN 61300-3-24-200 7

纤维光学互联装置和无源部件.基本 试验和测量程序.第3-24部分:检验和 测量.极性维护光纤用光学连接器关 键精度

DIN EN 61300-3-29-200 6

纤维光学互连器件和无源元件.基本 试验和测量程序.第3-29部分:检查和 测量.表征 DWDM 元件的光谱传输功 能振幅的

EN 61300-3-15:2007 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-17: Examinations and measurements; endface angle of angle-polished ferrules (IEC 61300-3-17:1999); German version EN 61300-3-17:1999 Fibre optic interconnecting devices and passive components - Basic tests and measurement procedures - Part 3-2: Examinations and measurements; polarization dependence of attenuation in a single-mode fibre optic device (IEC 61300-3-2:1999); German version EN 61300-3-2:1999 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-20: Examinations and measurements; Directivity of fibre optic branching devices (IEC 61300-3-20:2001); German version EN 61300-3-20:2001 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-23: Examination and measurements - Fibre position relative to ferrule endface (IEC 61300-3-23:1998); German version EN 61300-3-23:1998 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-24: Examinations and measurements Keying accuracy of optical connectors for polarization maintaining fibre (IEC 61300-3-24:2006); German version EN 61300-3-24:2007 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-29: Examinations and measurements Measurement techniques for characterizing the amplitude of the

DIN EN 61300-3-3-2003

纤维光学互连装置和无源元件.基本 试验和测量步骤.第3-3部分:检验和 测量.衰减和回波损耗中变化的动态 监控

DIN EN 61300-3-31-200 3

光纤互连装置和无源部件.基本试验 和测量程序.第3-31部分:检验和测量. 纤维光学源的耦合功率比测量

DIN EN 61300-3-33-200 0

纤维光学互连器件和无源元件.基本 试验和测量程序.第3-33部分:套管拔 出力

DIN EN 61300-3-37-200 6

纤维光学互连器件和无源元件.基本 试验和测量程序.第3-37部分:检查和 测量.光学纤维角度抛光端面的曲率 角度(I

DIN EN 61300-3-40-199 8

光纤互联装置和无源元件.基本试验 和测量程序.第3-40部分:检验和测量. 带极化保持(PM)纤维引线的连接器 的衰减

DIN EN 61300-3-6-2003

纤维光学互连装置和无源元件.基本 试验和测量步骤.第3-6部分:检验和 测量.回波损耗

spectral transfer function of DWDM components (IEC 61300-3-29:2005); German version EN 61300-3-29:2006 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-3: Examinations and measurements; Active monitoring of changes in attenuation and return loss (IEC 61300-3-3:2003); German version EN 61300-3-3:2003 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-31: Examinations and measurements; Coupled power ratio measurement for fibre optic sources (IEC 61300-3-31:2003); German version EN 61300-3-31:2003 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-33: Examinations and measurements; ferrule withdrawal force (IEC 61300-3-33:1999); German version EN 61300-3-33:1999 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-37: Examinations and measurements Endface angle of angle-polished optical fibres (IEC 61300-3-37:2005); German version EN 61300-3-37:2005 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-40: Examinations and measurements; Extinction ratio of a polarization maintaining (pm) fibre pigtailed connector (IEC 61300-3-40:1998); German version EN 61300-3-40:1998 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-6:

DIN EN 61753-022-2-20 03

光纤互连装置和无源部件性能标准. 第022-2部分:C 类多模纤维与光纤连 接器的端接.受控环境

DIN EN 61753-051-3-20 02

光纤互连装置和无源部件性能标准. 第051-3部分:U 类非受控环境用插销 固 定 式 衰 减 器 单 模 纤 维 (IEC 61753-051-3:

DIN EN 61753-052-3-20 02

光纤互连装置和无源部件性能标准. 第052-3部分:U 类非受控环境用辫子 管 固 定 式 衰 减 器 单 模 纤 维 (IEC 61753-052-

DIN EN 61753-053-3-20 04

纤维光学互连器件和无源元件性能 标准.第053-3部分:U 类连续可变衰减 器.非受控环境

DIN EN 61753-061-3-20 05

纤维光学互连器件和无源元件性能 标准.第061-3部分:U 类单模纤维光学 有抽头的隔离器.非受控环境

DIN EN 61753-091-3-20 05

纤维光学互连器件和无源元件性能 标准.第091-3部分:U 类单模纤维光学 有抽头的循环器.非受控环境

Examinations and measurements; Return loss (IEC 61300-3-6:2003); German version EN 61300-3-6:2003 Fibre optic interconnecting devices and passive components performance standard - Part 022-2: Fibre optic connectors terminates on multimode fibre for category C - Controlled environment (IEC 61753-022-2:2003); German version EN 61753-022-2:2003 Fibre optic interconnecting devices and passive components performance standard - Part 051-3: Single-mode fibre, plug-style fixed attenuators for category U; Uncontrolled environment (IEC 61753-051-3:2001); German version EN 61753-051-3:2002 Fibre optic interconnecting devices and passive components performance standard - Part 052-3: Single-mode fibre, pigtailed-style fixed attenuators for category U; Uncontrolled environment (IEC 61753-052-3:2001); German version EN 61753-052-3:2002 Fibre optic interconnecting devices and passive components performance standard - Part 053-3: Continuously variable attenuators for category U Uncontrolled environment (IEC 61753-053-3:2004); German version EN 61753-053-3:2004 Fibre optic interconnecting devices and passive components performance standard - Part 061-3: Single mode fibre optic pigtailed style isolators for category U Uncontrolled environment (IEC 61753-061-3:2004); German version EN 61753-061-3:2004 Fibre optic interconnecting devices and passive components performance standard - Part 091-3: Single-mode fibre optic pigtailed style circulators for category U - Uncontrolled environment (IEC 61753-091-3:2004);

DIN EN 61753-101-2-20 07

纤维光学互连器件和无源元件性能 标准.第101-2部分:C 类光纤管理系 统.受控环境

DIN EN 61753-2-1-2001

光纤互连装置和无源部件性能标准. 第2-1部分:端接于 U 级单模纤维的光 纤连接器.非受控环境

DIN EN 61753-2-3-2002

纤维光学互连器件和无源元件性能 标准.第2-3部分:U 类非连接单模1濶 和 2濶非可选波长分路器件.非控制 环境

DIN EN 61754-12-2000

纤维光学连接器接口.第12部分:FS 型 连接器门类

DIN EN 61754-13-2006

纤 维 光 学 连 接 器 接 口 . 第 13 部 分 :FC-PC 型 连 接 器 门 (IEC 61754-13-2006)

DIN EN 61754-16-2000

纤维光学连接器接口.第16部分:PN 型连接器门类

DIN EN 61754-21-2005

纤维光学连接器接口.第21部分:塑料 光纤用 SMI 型连接器门类

DIN EN 61754-22-2006

纤 维 光 学 连 接 器 接 口 . 第 22 部 分:F-SMA 型连接器门类

German version EN 61753-091-3:2004 Fibre optic interconnecting devices and passive components performance standard - Part 101-2: Fibre management systems for category C Controlled environment (IEC 61753-101-2:2006); German version EN 61753-101-2:2006 Fibre optic interconnecting devices and passive components performance standard - Part 2-1: Fibre optic connectors terminated on single-mode fibre for category U; Uncontrolled environment (IEC 61753-2-1:2000); German version EN 61753-2-2-1:2000 Fibre optic interconnecting devices and passive components performance standard - Part 2-3: Non-connectorised single-mode 1× N and 2× N non-wavelength-selective branching devices for category U; Uncontrolled environment (IEC 61753-2-3:2001); German version EN 61753-2-3:2001 Fibre optic connector interfaces - Part 12: Type FS connector family (IEC 61754-12:1999); German version EN 61754-12:1999 Fibre optic connector interfaces - Part 13: Type FC-PC connector (IEC 61754-13:2006); German version EN 61754-13:2006 Fibre optic connector interfaces - Part 16: Type PN connector family (IEC 61754-16:1999); German version EN 61754-16:2000 Fibre optic connector interfaces - Part 21: Type SMI connector family for plastic optical fibre (IEC 61754-21:2005); German version EN 61754-21:2005 Fibre optic connector interfaces - Part 22: Type F-SMA connector family (IEC 61754-22:2005); German version EN 61754-22:2005

DIN EN 61754-23-2006

纤维光学连接器接口.第23部分:LX.5 型连接器门类

DIN EN 61754-4-1-2003

纤维光学连接器接口.第4-1部分:SC 型连接器系列.简化的 SC-PC 型连接 器插座接口

DIN EN 61754-6-2005

纤维光学连接器接口.第6部分:MU 型 连接器类

DIN EN 61754-7-2005

纤维光学连接器接口.第7部分:MPO 型连接器类

DIN EN 61755-1-2006

纤维光学连接器的接口.第1部分:单 一模式非散射移位纤维的光学接口. 总则和指南(IEC 61755-1:2005)

DIN EN 61755-2-1-2007

纤维光学连接器光学接口.第2-1部 分:单模非物理角接触光纤标准光学 接口

DIN EN 61755-2-2-2007

纤维光学连接器光学接口.第2-2部 分:标准单模成角物理接触光纤用光 学接口

DIN EN 61755-3-5-2007

纤维光学连接器光学接口.第3-5部 分:光学接口.单模光纤用直径为 2.5mm 和1.25mm、铜-镍合金包覆光 纤材料的圆柱

DIN

EN

纤维光学连接器的光学接口.第3-6部

Fibre optic connector interfaces - Part 23: Type LX.5 connector family (IEC 61754-23:2005); German version EN 61754-23:2005 Fibre optic connector interfaces - Part 4-1: Type SC connector family; Simplified receptacle SC-PC connector interfaces (IEC 61754-4-1:2003); German version EN 61754-4-1:2003 Fibre optic connector interfaces - Part 6: Type MU connector family (IEC 61754-6:1997 + A1:2001 + A2:2004); German version EN 61754-6:1997 + A1:2001 + A2:2005 Fibre optic connector interfaces - Part 7: Type MPO connector family (IEC 61754-7:2004); German version EN 61754-7:2005 Fibre optic connector optical interfaces - Part 1: Optical interfaces for single mode non-dispersion shifted fibres General and guidance (IEC 61755-1:2005); German version EN 61755-1:2006 Fibre optic connector optical interfaces - Part 2-1: Optical interface standard single mode non-angled physically contacting fibres (IEC 61755-2-1:2006); German version EN 61755-2-1:2006 Fibre optic connector optical interfaces - Part 2-2: Optical interface standard single mode angled physically contacting fibres (IEC 61755-2-2:2006); German version EN 61755-2-2:2006 Fibre optic connector optical interfaces - Part 3-5: Optical interface - 2,5 mm and 1,25 mm diameter cylindrical PC composite ferrule using Cu-Ni-alloy as fibre surrounding material, single mode fibre (IEC 61755-3-5:2006); German version EN 61755-3-5:2006 Fibre optic connector optical interfaces

61755-3-6-2007

分:光学接口.使用铜-镍合金作为单 模纤维光纤接口材料用的直径 2.5mm 和1.25

DIN EN 61756-1-2007

光纤互连设备和无源元器件.纤维管 理系统的接口标准.第1部分:总则和 指南

DIN EN 61757-1-1999

纤维光学传感器.第1部分:总规范 (IEC 61757-1-1998)

DIN EN 62005-7-2004

纤维光学互连器件和无源光学元件 的可靠性.第7部分:寿命应力模型

DIN EN 62148-11-2004

纤维光学有源元件及器件.包装和接 口标准.第14部分:14针集成调制器激 光二极管发射器

DIN EN 62148-4-2004

纤维光学有源元件及器件.包装和接 口标准.第4部分:PN 1x9塑料光纤无 线电收发信机

DIN EN 62148-6-2004

纤维光学有源元件及器件.包装和接 口标准.第6部分:ATM-PON 无线电收 发信机

DIN EN 62148-7-2003

纤维光学有源元件及器件.包装和接 口标准.第7部分:SFF LC 10针无线电 收发信机 纤维光学有源元件和器件.性能标准.

DIN

EN

- Part 3-6: Optical interface - 2,5 mm and 1,25 mm diameter cylindrical 8 degrees angled-PC composite ferrule using Cu-Ni-alloy as fibre surrounding material, single mode fibre (IEC 61755-3-6:2006); German version EN 61755-3-6:2006 Fibre optic interconnecting devices and passive components - Interface standard for fibre management systems - Part 1: General and guidance (IEC 61756-1:2006); German version EN 61756-1:2006 Fibre optic sensors - Part 1: Generic specification (IEC 61757-1:1998); German version EN 61757-1:1999 Reliability of fibre optic interconnecting devices and passive optical components - Part 7: Life stress modeling (IEC 62005-7:2004); German version EN 62005-7:2004 Fibre optic active components and devices - Package and interface standards Part 11: 14-pin modulator-integrated laser diode transmitters (IEC 62148-11:2003); German version EN 62148-11:2003 Fibre optic active components and devices - Package and interface standards - Part 4: PN 1x9 plastic optical fibre transceivers (IEC 62148-4:2003); German version EN 62148-4:2003 Fibre optic active components and devices - Package and interface standards - Part 6: ATM-PON transceivers (IEC 62148-6:2003); German version EN 62148-6:2003 Fibre optic active components and devices - Package and interface standards - Part 7: SFF LC 10-pin transceivers (IEC 62148-7:2003); German version EN 62148-7:2003 Fibre optic active components and

62149-1-2004

第1部分:总则和指南

DIN EN 62149-3-2004

纤维光学有源元件和器件.性能标准. 第3部分:2.5Gbit/s 调制器-集成激光 二极管发射机

DIN EN 62149-4-2003

光纤有源元件及器件.性能标准.第4 部分:千兆比特以太网用1300nm 纤维 光学无线电收发信机

DIN EN 62149-5-2004

纤维光学有源元件及器件.性能标准. 第5部分:带 LD 驱动和 CDR IC 的 ATM-PON 无线电收发信机

DIN EN 62149-6-2004

纤维光学有源元件及器件.性能标准. 第6部分:650-nm 250-Mbit/s 塑料光纤 无线电收发信机

DIN EN 62150-1-2005

纤维光学有源元件和器件.试验和测 量 规 程 . 第 1 部 分 : 总 则 和 指 南 (IEC 62150-1-2005) ; 德 文 版 本 EN 62150-1-2005

DIN EN 62150-2-2005

纤维光学有源元件和器件.试验和测 量规程.第2部分:ATM-POM 无线电收 发信机

DIN EN 622-1-2003 DIN EN 622-2 Berichtigung 1-2006

纤维板.规范.第1部分:一般要求

纤维板.规范.第2部分:硬质纤维板的 一般要求.德文版本 EN 622-2-2004对 DIN EN 622-2-2004的勘误;

devices - Performance standards - Part 1: General and guidance (IEC 62149-1:2004 + Corrigendum 2004); German version EN 62149-1:2004 Fibre optic active components and devices - Performance standards - Part 3: 2,5 Gbit/s modulator-integrated laser diode transmitters (IEC 62149-3:2004); German version EN 62149-3:2004 Fibre optic active components and devices - Performance standards - Part 4: 1300 nm fibre optic transceivers for Gigabit Ethernet application (IEC 62149-4:2003 + Corrigendum 2003); German version EN 62149-4:2003 Fibre optic active components and devices - Performance standards - Part 5: ATM-PON transceivers with LD driver and CDR ICs (IEC 62149-5:2003); German version EN 62149-5:2003 Fibre optic active components and devices - Performance standards - Part 6: 650-nm 250-Mbit/s plastic optical fibre transceivers (IEC 62149-6:2003); German version EN 62149-6:2003 Fibre optic active components and devices - Test and measurement procedures - Part 1: General and guidance (IEC 62150-1:2005); German version EN 62150-1:2005 Fibre optic active components and devices - Test and measurement procedures - Part 2: ATM-PON transceivers (IEC 62150-2:2004); German version EN 62150-2:2004 Fibreboards - Specifications - Part 1: General requirements; German version EN 622-1:2003 Fibreboards - Specifications - Part 2: Requirements for hardboards - German version EN 622-2:2004, Corrigenda to DIN EN 622-2:2004-07; German

DIN EN 622-2-2004 DIN EN 622-3-2004 DIN EN 622-4-1997

纤维板.规范.第2部分:硬质纤维板的 要求 纤维板.规范.第3部分:中硬度板的要 求

纤维板.规范.第4部分:多孔板要求

DIN EN 622-5-2006

纤维板.规范.第5部分:干燥处理要求 (MDF)

DIN 637-1994

EN

塑料管道系统.玻璃纤维增强塑料部 件.用重力测量法对成分含量的测定; 德文版本 EN 637:1994

DIN 705-1994

EN

塑料管道系统.玻璃纤维增强热固塑 料管和管件.回归分析和应用方法

DIN 872-2005

EN

水质.悬浮固体的测量.玻璃纤维过滤 器的过滤方法

DIN EN ISO 10306-1995

纺织品.棉纤维。 成熟度的气流法评定

DIN EN ISO 10350-2-2001

塑料.可比单点数据的采集和表示.第 2部分:长纤维增强塑料

DIN EN ISO 10352-1997

纤维增强塑料.模制化合物和聚酯胶 片.单位面积质量测定

DIN EN ISO 105-X13-1997

纺织品.色牢度试验.第 X13部分:棉纤 维物化学处理产生的折缝、 打褶和定

version EN 622-2:2004/AC:2005 Fibreboards - Specifications - Part 2: Requirements for hardboards; German version EN 622-2:2004 Fibreboards - Specifications - Part 3: Requirements for medium boards; German version EN 622-3:2004 Fibreboards - Specifications - Part 4: Requirements for softboards; German version EN 622-4:1997 Fibreboards - Specifications - Part 5: Requirements for dry process boards (MDF) English version of DIN EN 622-5:2006-09 Plastics piping systems Glass-reinforced plastics components Determination of the amounts of constituents using the gravimetric method; German version EN 637:1994 Plastics piping systems Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Methods for regression analyses and their use; German version EN 705:1994 Water quality - Determination of suspended solids - Method by filtration through glass fibre filters; German version EN 872:2005 Textiles - Cotton fibres - Evaluation of maturity by the air flow method (ISO 10306:1993); German version EN ISO 10306:1995 Plastics - Acquisition and presentation of comparable single-point data - Part 2: Long-fibre-reinforced plastics (ISO 10350-2:2001); German version EN ISO 10350-2:2001 Fibre-reinforced plastics - Moulding compounds and prepregs Determination of mass per unit area (ISO 10352:1997); German version EN ISO 10352:1997 Textiles - Tests for colour fastness Part X13: Colour fastness of wool dyes

型工艺的色牢度

DIN EN ISO 105-Z03-1998

纺织品.色牢度试验.第 Z03部分:聚丙 烯腈纤维用基本染料的互溶性

DIN EN ISO 10548-2003

碳纤维.尺寸的测定

DIN EN ISO 1061-2000

塑料.不增塑的乙酸纤维素.游离酸度 的测定

DIN EN ISO 10618-2004

碳纤维.树脂浸渍纱拉伸性能的测定

DIN EN ISO 1140-2005 DIN EN ISO 1141-2005

纤维绳索.聚酰胺.3、4和8股绞绳

纤维绳索.聚酯.3、4和8股绞绳

DIN EN ISO 11667-1999

纤维增强塑料.模塑化合物和聚酯胶 片.树脂、 增强纤维和矿物填料含量的 测定.溶解方法

DIN EN ISO 1172-1998

纺织玻璃纤维增强塑料.预浸料坯,模 塑化合物及叠层板材.纺织玻璃纤维 和矿物填充料含量的测定.煅烧法

DIN EN ISO 11721-1-2001

织物.含纤维素织物耐微生物性测定. 土埋试验.第1部分:腐烂延迟评定

to processes using chemical means for creasing, pleating and setting (ISO 105-X13:1994); German version EN ISO 105-X13:1997 Textiles - Tests for colour fastness Part Z03: Intercompatibility of basic dyes for acrylic fibres (ISO 105-Z03:1996); German version EN ISO 105-Z03:1998 Carbon fibre - Determination of size content (ISO 10548:2002); German version EN ISO 10548:2003 Plastics - Unplasticized cellulose acetate - Determination of free acidity (ISO 1061:1990); German version EN ISO 1061:1999 Carbon fibre - Determination of tensile properties of resin-impregnated yarn (ISO 10618:2004); German version EN ISO 10618:2004 Fibre ropes - Polyamide - 3-, 4- and 8-strand ropes (ISO 1140:2004); German version EN ISO 1140:2004 Fibre ropes - Polyester - 3-, 4- and 8-strand ropes (ISO 1141:2004); German version EN ISO 1141:2004 Fibre-reinforced plastics - Moulding compounds and prepregs Determination of resin, reinforced-fibre and mineral-filler content - Dissolution methods (ISO 11667:1997); German version EN ISO 11667:1999 Textile-glass-reinforced plastics Prepregs, moulding compounds and laminates - Determination of the textile-glass and mineral-filler content; calcination methods (ISO 1172:1996); German version EN ISO 1172:1998 Textiles - Determination of resistance of cellulose-containing textiles to micro-organisms - Soil burial test Part 1: Assessment of rot-retardant finishing (ISO 11721-1:2001); German

DIN EN ISO 11721-2-2003

纺织品.纤维素纺织品抗菌性的测定. 土埋试验.第1部分:防腐处理长期性 鉴定

DIN EN ISO 1181-2005

纤维绳索.马尼拉麻和西沙尔麻绳 索.3、4和8股绳

DIN EN ISO 12114-1997

纤维增强塑料.热固性模塑化合物和 聚酯胶片.固化特性测定

DIN EN ISO 12115-1997

纤维增强塑料.热固性模塑化合物和 聚酯胶片.流动性、 熟化和使用寿命测 定

DIN EN ISO 12215-1-2001

小型船舶.船体建造和草图.第1部分: 材料.玻璃纤维增强热固树脂标准层 压板

DIN EN ISO 13002-1999

碳纤维.长丝纱的命名体系

DIN EN ISO 1346-2005

纤维绳索.聚丙烯裂膜、单丝和多丝 (PP2) 及 聚 丙 烯 高 弹 性 多 丝 (PP3) 绳 索.3、4和8股绳索

DIN EN ISO 14125-1998

纤维增强塑料.弯曲性能测定

DIN EN ISO 14126-2000

纤维增强塑料混合物.水平方向压缩 能力的测定

version EN ISO 11721-1:2001 Textiles - Determination of the resistance of cellulose containing textiles to microorganisms; Soil burial test - Part 2: Identification of long-term resistance of a rot retardant finish (ISO 11721-2:2003); German version EN ISO 11721-2:2003 Fibre ropes - Manila and sisal - 3-, 4and 8-strand ropes (ISO 1181:2004); German version EN ISO 1181:2004 Fibre-reinforced plastics Thermosetting moulding compounds and prepregs - Determination of cure characteristics (ISO 12114:1997); German version EN ISO 12114:1997 Fibre-reinforced plastics Thermosetting moulding compounds and prepregs - Determination of flowability, maturation and shelf life (ISO 12115:1997); German version EN ISO 12115:1997 Small craft - Hull construction and scantlings - Part 1: Materials: Thermosetting resins, glass-fibre reinforcement, reference laminate (ISO 12215-1:2000); German version EN ISO 12215-1:2000 Carbon fibre - Designation system for filament yarns (ISO 13002:1998); German version EN ISO 13002:1998 Fibre ropes - Polypropylene split film, monofilament and multifilament (PP2) and polypropylene high tenacity multifilament (PP3) - 3-, 4- and 8-strand ropes (ISO 1346:2004); German version EN ISO 1346:2004 Fibre-reinforced plastic composites Determination of flexural properties (ISO 14125:1998); German version EN ISO 14125:1998 Fibre-reinforced plastic composites Determination of compressive properties in the in-plane direction

DIN EN ISO 14129-1998

纤维增强塑料符合材料.用45角度拉 伸试验方法测定平面内剪切应力/剪 切应变响应关系, 包括平面内剪切模 数/强

DIN EN ISO 14130-1998

纤维增强塑料符合材料.用短梁法测 定表面层间剪切强度

DIN EN ISO 14692-1-2005

石油和天然气工业.玻璃纤维增强塑 料(GRP)管.第1部分:词汇、符号、应 用和材料

DIN EN ISO 14692-2 Berichtigung 1-2007

石油和天然气工业.玻璃纤维增强塑 料.第2部分:生产资格

DIN EN ISO 14692-2-2005

石油和天然气工业.玻璃纤维增强塑 料(GRP)管.第2部分:合格鉴定和制造

DIN EN ISO 14692-3 Berichtigung 1-2007

石油和天然气工业.玻璃纤维增强塑 料管.第3部分:系统管道

DIN EN ISO 14692-3-2005

石油和天然气工业.玻璃纤维增强塑 料(GRP)管.第3部分:系统设计

(ISO 14126:1999); German version EN ISO 14126:1999 Fibre-reinforced plastic composites Determination of the in-plane shear stress/shear strain reponse, including the in-plane schear modulus and strength, by ? 45°tension test method (ISO 14129:1997); German version EN ISO 14129:1997 Fibre reinforced plastic composites Determination of apparent interlaminar shear strength by short beam-method (ISO 14130:1997); German version EN ISO 14130:1997 Petroleum and natural gas industries Glass-reinforced plastics (GRP) piping - Part 1: Vocabulary, symbols, applications and materials (ISO 14692-1:2002); English version EN ISO 14692-1:2002 Petroleum and natural gas industries Glass-reinforced plastics (GRP) piping - Part 2: Qualification and manufacture (ISO 14692-2:2002); English version EN ISO 14692-2:2002, Corrigenda to DIN EN ISO 14692-2:2005-07; English version EN ISO 14692-2:2002/AC:2006 Petroleum and natural gas industries Glass-reinforced plastics (GRP) piping - Part 2: Qualification and manufacture (ISO 14692-2:2002); English version EN ISO 14692-2:2002 Petroleum and natural gas industries Glass-reinforced plastics (GRP) piping - Part 3: System design (ISO 14692-3:2002); English version EN ISO 14692-3:2002, Corrigenda to DIN EN ISO 14692-3:2005-07; English version EN ISO 14692-3:2002/AC:2006 Petroleum and natural gas industries Glass-reinforced plastics (GRP) piping - Part 3: System design (ISO

DIN EN ISO 14692-4-2005

石油和天然气工业.玻璃纤维增强塑 料(GRP)管.第4部分:制造、安装和操 作

DIN EN ISO 15310-2005

纤维增强塑料复合材料.用板捻法测 定内剪模量

DIN EN ISO 1598-1999

塑料.乙酸纤维素.不可溶解成份的测 定(ISO 1598-1999)

DIN EN ISO 1599-2000

塑料.乙酸纤维素.模塑时粘度降低的 测定

DIN EN ISO 1600-2000

塑料.乙酸纤维素.利用加热的不同周 期在模制样品生产中的光吸收量的 测定

DIN EN ISO 16000-7-2007

室内空气.第7部分:空气中石棉纤维 浓度测定用取样策略

DIN EN ISO 16472-2006

动物饲料.精制淀粉酶中性清洁剂纤 维 (aNDF) 含 量 的 测 定 (ISO 16472:2006)

DIN EN ISO 1968-2005 DIN EN ISO 1969-2005 DIN EN ISO 2078-1994

纤维绳索和绳索制品.词汇

纤维绳索.聚乙烯绳索.3和4股绳索 纺 织 玻 璃 纤 维 . 纱 线 . 标 识 (ISO 2078:1993); 德 文 版 本 EN ISO

14692-3:2002); English version EN ISO 14692-3:2002 Petroleum and natural gas industries Glass-reinforced plastics (GRP) piping - Part 4: Fabrication, installation and operation (ISO 14692-4:2002); English version EN ISO 14692-4:2002 Fibre-reinforced plastic composites Determination of the in-plane shear modulus by the plate twist method (ISO 15310:1999); German version EN ISO 15310:2005 Plastics - Cellulose acetate Determination of insoluble particles (ISO 1598:1990); German version EN ISO 1598:1999 Plastics - Cellulose acetate Determination of viscosity loss on moulding (ISO 1599:1990); German version EN ISO 1599:1999 Plastics - Cellulose acetate Determination of light absorption on moulded specimens produced using different periods of heating (ISO 1600:1990); German version EN ISO 1600:1999 Indoor air - Part 7: Sampling strategy for determination of airborne asbestos fibre concentrations (ISO 16000-7:2007); German version EN ISO 16000-7:2007 Animal feeding stuffs - Determination of amylase-treated neutral detergent fibre content (aNDF) (ISO 16472:2006) English version of DIN EN ISO 16472:2006-07 Fibre ropes and cordage - Vocabulary (ISO 1968:2004); Trilingual version EN ISO 1968:2004 Fibre ropes - Polyethylene - 3- and 4-strand ropes (ISO 1969:2004); German version EN ISO 1969:2004 Textile glass - Yarns - Designation (ISO 2078:1993); German version EN

2078:1994 DIN EN ISO 2307-2005

纤维绳索.特定物理和机械性能测定

DIN EN ISO 2398-1997

压缩空气用纺织纤维增强橡胶软管. 规范

DIN EN ISO 3037-2007

波纹纤维板.边缘耐压碎性的测定(边 缘不涂蜡法)

DIN EN ISO 5079-1996

纺织品.纤维.单纤维断裂强力和伸长 率测定

DIN EN ISO 527-4-1997

塑料.拉伸性能测定.第4部分:均质和 非均质增强纤维塑料复合材料试验 条件

DIN EN ISO 527-5-1997

塑料.抗拉性能的测定.第5部分:单向 增强纤维塑料复合材料试验条件

DIN EN ISO 585-2000

塑料.不增塑的乙酸纤维素.含水量的 测定

DIN EN ISO 6865-2001

动物饲料.粗纤维含量的测定.中级过 滤法

DIN EN ISO 6888-2-2003

食品和动物饲料的微生物学.凝血酶 阳性葡萄球菌(金黄色葡萄球菌及其 他种)计数的水平方法.第2部分:兔血 浆纤维

ISO 2078:1994 Fibre ropes - Determination of certain physical and mechanical properties (ISO 2307:2005); German version EN ISO 2307:2005 Rubber hose, textile-reinforced, for compressed air - Specification (ISO 2398:1995); German version EN ISO 2398:1997 Corrugated fibreboard - Determination of edgewise crush resistance (unwaxed edge method) (ISO 3037:2007); German version EN ISO 3037:2007 Textiles - Fibres - Determination of breaking force and elongation at break of individual fibres (ISO 5079:1979); German version EN ISO 5079:1995 Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and anisotropic fibre-reinforced plastic composites (ISO 527-4:1997); German version EN ISO 527-4:1997 Plastics - Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites (ISO 527-5:1997); German version EN ISO 527-5:1997 Plastics - Unplasticized cellulose acetate - Determination of moisture content (ISO 585:1990); German version EN ISO 585:1999 Animal feeding stuffs - Determination of crude fibre content - Method with intermediate filtration (ISO 6865:2000); German version EN ISO 6865:2000 Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of coagulase-positive staphylococci (Staphylococcus aureus and other species) - Part 2: Technique using rabbit plasma fibrinogen agar medium (ISO 6888-2:1999 + AMD

DIN EN ISO 75-3-2004

塑料.载荷下挠曲温度的测定.第3部 分:高强度热固性叠层板和长纤维增 强塑料

DIN EN ISO 7822-2000

玻璃纤维增强塑料.孔隙率的测定.烧 失量、机械粉碎和静态计数法

DIN EN ISO 9163-2005

纺织玻璃纤维.粗纱.试样的制备和浸 渍粗纱拉伸强度的测定

DIN EN ISO 9237-1995

纺织品.纤维织物透气性测定

DIN EN ISO 9554-2005

纤维绳索.一般规范

DIN ISO 14446-2002

涂料和清漆的粘合剂.工业纤维素硝 酸盐溶液粘度测定和此类溶液的分 类 (ISO 14446:1999)

DIN ISO 15636-2004 DIN ISO 16057-2003 DIN ISO 1887-1984 DIN ISO 2076-2001 DIN ISO 3039-1993 DIN ISO

硫化纤维磨料盘用背衬垫 砂布.硫化纤维砂轮 纺织玻璃纤维.可燃物含量的测定 纺织品.人造纤维.属名

瓦楞纤维板.分离后组成原纸定量的 测定 棉纤维.平列纤维束断裂韧性的测定

1:2003); German version EN ISO 6888-2:1999 + A1:2003 Plastics - Determination of temperature of deflection under load - Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics (ISO 75-3:2004); German version EN ISO 75-3:2004 Textile glass reinforced plastics Determination of void content - Loss on ignition, mechanical disintegration and statistical counting methods (ISO 7822:1990); German version EN ISO 7822:1999 Textile glass - Rovings - Manufacture of test specimens and determination of tensile strength of impregnated rovings (ISO 9163:2005); German version EN ISO 9163:2005 Textiles Determination of permeability of fabrics to air (ISO 9237:1995); German version EN ISO 9237:1995 Fibre ropes - General specifications (ISO 9554:2005); German version EN ISO 9554:2005 Binders for paints and varnishes Determination of the viscosity of industrial cellulose nitrate solutions and classification of such solutions (ISO 14446:1999) Back-up pads for vulcanized fibre discs (ISO 15636:2003) Coated abrasives - Vulcanized-fibre discs (ISO 16057:2002) Textile glass; determination of combustible matter content Textiles - Man-made fibres - Generic names (identical with ISO 2076:1999) Corrugated fibreboard; determination of the grammage of the component papers after separation; identical with ISO 3039:1975 Cotton fibres; determination of

3060-1994 塑料.灰分的测定.第3部分:未增塑的 醋 酸 纤 维 素 ; 等 同 采 用 ISO 3451-3:1984 玻璃.粘度和粘度固定点.第3部分:纤 维伸长粘度计测定粘度

DIN ISO 3451-3-1991

DIN ISO 7884-3-1998

DIN ISO 8115-2-1997

大包.第2部分:人造棉纤维包.尺寸

DIN 1201-2004

V

排水和污水用未加筋的、 钢纤维的和 加筋的混凝土管和配件.1型和2型.要 求、试验方法和合格评定

排水和污水用未加筋的、 钢纤维和加 DIN V 筋的预制混凝土人孔.1型和2型.第1 4034-1-2004 部分:要求、试验方法和合格评定

DIN V 65352 Bb.1-1987

航空航天.纤维复合物的合格鉴定和 验收试验结果的统计评价方法.计算 实例

DIN V 航空航天.纤维复合物的合格鉴定和 65352-1987 验收试验结果的统计评价方法

航空航天.纤维加筋塑料.单向叠层板 DIN V 材的试验.与纤维方向平行和横切的 65380-1987 压缩试验 DIN V 航空航天.碳纤维.化学分析.类金属元 65579-1991 素的测定

高技术陶瓷.陶瓷成分.增强材料的试 DIN V ENV 验方法.第6部分:高温测定纤维的抗 1007-6-2002 拉性能; 德文版本 ENV 1007-6:2002

DIN V ENV 绝缘耐火制品.第7部分:陶瓷纤维制

breaking tenacity of flat bundles (ISO 3060:1974) Plastics; determination of ash; unplasticized cellulose acetate; identical with ISO 3451-3:1984 Glass - Viscosity and viscometric fixed points - Part 3: Determination of viscosity by fibre elongation viscometer (ISO 7884-3:1987) Bales - Part 2: Bales of man-made staple fibres - Dimensions (ISO 8115-2:1994) Concrete pipes and fittings, unreinforced, steel fibre and reinforced for drains and sewers - Type 1 and Type 2 - Requirements, test methods and evaluation of conformity Prefabricated concrete manholes, unreinforced, steel fibre and reinforced for drains and sewers - Type 1 and Type 2 - Part 1: Requirements, test methods and evaluation of conformity Aerospace; method of statistical evaluation of qualification and acceptance test results for fibre composites; example of calculation Aerospace; method of statistical evaluation of qualification and acceptance test results for fibre composites Aerospace; fiber-reinforced plastics; testing of unidirectional laminates; compression test, parallel and transverse to fiber direction Aerospace; carbon fibres; chemical analysis; determination of the metalloid elements Advanced technical ceramics Ceramic composites; Methods of test for reinforcements - Part 6: Determination of tensile properties of filament at high temperature; German version ENV 1007-6:2002 Insulating refractory products; part 7:

1094-7-1994

品 的 试 验 方 法 ; 德 文 版 本 ENV 1094-7:1993

DIN V ENV 玻璃纤维混凝土试验方法.第8部分: 1170-8-1996 气侯循环试验

DIN VDE 0311-10-1988

电工用纤维素绝缘纸.定义和一般要 求

DIN VDE 0311-31-1988

电工用纤维素绝缘纸.规范.普通电工 纸

DIN VDE 0311-32-1988

电工用纤维素绝缘纸.规范.电容器纸

DIN VDE 0311-33-1988

电工用纤维素纸.规范.绉纹纸

DIN VDE 0311-34-1988

电工用纤维素绝缘纸规范.电解电容 器纸

DIN VDE 0311-35-1988 DIN VDE 0312-1959 DIN VDE 0334-1-1972 DIN VDE 0365-1-1967 DIN VDE 0365-2-1967 DIN VDE 0365-3-1967

电工用纤维素绝缘纸.规范.专用纸

层压材料试验规则.电气工程用硫化 纤维材料 电工用织物玻璃纤维制品规范.第1部 分:织物玻璃纤维织品 电工用清漆纤维素材料规定.第1部 分:漆纸 电工用清漆纤维素材料规定.第2部 分:漆布 电工用清漆纤维素材料规定.第3部 分:玻璃纤维漆布

methods of test for ceramic fibre products; German version ENV 1094-7:1993 Test method for glass-fibre reinforced cement - Part 8: Cyclic weathering type test; German version prENV 1170-8:1996 Cellulosic paper for electrical purposes; definitions and general requirements; identical with IEC 60554-1:1977 (status 1983) Cellulosic paper for electrical purposes; specifications; general purpose electrical papers; identical with IEC 60554-3-1:1979 Cellulosic paper for electrical purposes; specifications; capacitor papers; identical with IEC 60554-3-2:1983 Cellulosic paper for electrical purposes; specifications; cr?pe papers; identical with IEC 60554-3-3:1980 Cellulosic paper for electrical purposes; specifications; electrolytic capacitor papers; identical with IEC 60554-3-4:1979 Cellulosic paper for electrical purposes; specifications; special paper; IEC 60554-3-5:1984, modified Rules for testing methods for laminates; vulcanized fibres for electrical engineering Regulations for textile glass products in electrical engineering; part 1: Textile glass fabrics Regulations for varnished fibrous materials for electrical engineering; part 1: Varnished papers Regulations for varnished fibrous materials for electrical engineering; part 2: Varnished fabrics Regulations for varnished fibrous materials for electrical engineering; part 3: Varnished glass fabrics

DIN VDE 0441-2-1982

标称电压在1KV 以上的系统用有机 材料制成的绝缘子的试验.带玻璃纤 维芯子的户外复合材料绝缘子的试 验 通信系统光纤电缆.第4部分:室内用 单纤维电缆

DIN VDE 0888-4-1999

Tests on insulators of organic material for systems with nominal voltages greater than 1 kV; tests on outdoor composite insulators with fibre glass core VDE Guide Optical fibre cables for communication systems - Part 4: Indoor cables with one fibre


推荐相关:

中国与德国材料标准对照表.xls

中国与德国材料标准对照表_材料科学_工程科技_专业资料。德国 SMS 依据:SN359 中德材料牌号比较,依据SN359 不保证材料完整和替换!编号 原有牌号 标准 备注 中国...


德国材料标准对照表.doc

德国材料标准对照表 - 中德常用金属材料对照表 一、普通碳素结构钢 DIN GB


德国纤维标准.doc

德国纤维标准_专业资料。各国纤维 标准编号DIN 15551-3-1985 中文


中国与德国材料标准对照表_图文.xls

中国与德国材料标准对照表 - 德国 SMS 依据:SN359 中德材料牌号比较,依据SN359 不保证材料完整和替换! 编号 原有牌号 标准 备注 中国 材料牌号 工程用钢 01....


中国与德国材料标准对照表_图文.xls

中国与德国材料标准对照表 - 德国 SMS 依据:SN359 中德材料牌号比较,依据SN359 不保证材料完整和替换! 编号 原有牌号 标准 备注 中国 材料牌号 工程用钢 瑞典 ...


中国与德国材料标准对照表_图文.xls

中国与德国材料标准对照表 - 德国 SMS 依据:SN359 中德材料牌号比较,依据SN359 不保证材料完整和替换! 编号 原有牌号 标准 备注 中国 材料牌号 工程用钢 01....


中国与德国材料标准对照表_图文.xls

中国与德国材料标准对照表 - 德国 SMS 依据:SN359 中德材料牌号比较,依据SN359 不保证材料完整和替换! 编号 原有牌号 标准 备注 中国 材料牌号 工程用钢 01....


中国与德国材料标准对照表_图文.xls

中国与德国材料标准对照表 - 德国 SMS 依据:SN359 中德材料牌号比较,依据SN359 不保证材料完整和替换! 编号 原有牌号 标准 备注 中国 材料牌号 工程用钢 瑞典 ...


中国与德国材料标准对照表AAA_图文.xls

中国与德国材料标准对照表AAA - 德国 SMS 依据:SN359 中德材料牌号比较,依据SN359 不保证材料完整和替换! 编号 原有牌号 标准 备注 中国 材料牌号 工程用钢 01...


德国常用材料牌号对照表.doc

德国常用材料牌号对照表 - 中国、美国、德国常用材料牌号对照表 中国 美国 AS


中国与德国材料标准对照表_图文.xls

中国与德国材料标准对照表 - 德国 SMS 依据:SN359 中德材料牌号比较,依据SN359 不保证材料完整和替换! 编号 原有牌号 标准 备注 中国 材料牌号 工程用钢 瑞典 ...


DIN3140_德国工业标准-光学元件公差.doc

DIN3140_德国工业标准-光学元件公差 - 光学元件公差 ★光学元件公差 本文所有提及的光学公差都涉及到 DIN 3140 标准,DIN 3140 是历经 15 年 的调查研究,并于 ...


PG德国标准对照表.xls

PG德国标准对照表 - 本尺寸 编号 Pg7 Pg9 Pg11 Pg13.5 P


DIN德国钢材标准.pdf

DIN德国钢材标准 - DIN 德国钢材标准 2 2009-02-04 12:52 P.M. 中国 GB 牌号 (Q235) 日本 JIS 标准 牌号 号 GGP G3452 STPY41 G3...


中国材料与德国 瑞士材料的对照表.xls

玻璃纤维 bois dur bois de charmille 硬木 角树木 cuir bois de tilleul bois...中国与德国材料标准对照... 12页 5下载券 中国与德国材料标准对照... 12页...


德国DIN标准材料.doc

德国DIN标准材料 - 1、C15E 2、C15R 3、15NiCr13 4、1


最新各国材料牌号对照表_图文.xls

最新各国材料牌号对照表 - 材料对照表 铸铁 国家和标准 工件材料组 材料编号 德国 DIN 中国 GB BS 英国 EN 法国 AFNOR 灰口铸铁(非合金) ASTM A4876 No20B ...


德国材质对应国标表.pdf

德国材质对应国标表 - Enclosure 11 Conversion List


德国金属材料排号标准.pdf

德国金属材料牌号表示方法简介 一、德国有色金属的牌号表示方法 德国 DIN 标准编号由 DIN 、序号和制(修)订年份组 成。DIN 标准中的有色金属材料牌号表示方法、...


德国工业代码表-最全的各国材料、成分对照表.xls

德国工业代码表-最全的各国材料、成分对照表 - 整理最全的世界材料标准大全,德国工业代码表,材料对照表,材料成分对照表,国标,德标,英国材料标准,瑞典材料标准,日本...

网站首页 | 网站地图
All rights reserved Powered by 酷我资料网 koorio.com
copyright ©right 2014-2019。
文档资料库内容来自网络,如有侵犯请联系客服。zhit325@126.com